Vetonek self -leveling mortar
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.
Vetonek self -leveling mortar
Vetonek self -leveling mortar It is a product of easy application Ideal for fix I prepare soils Before placing park either tile. If you are thinking of improving the floor of a room, you have it cheaper and easier than ever.
Thanks to your fluency, achieve very smooth, with high planimetry, without fissures and with great hardness. Take this opportunity to Save money, gain time and get a Professional result.
What is the Vetonek self -leveling mortar?
This mortar is perfect for Repair soils very damaged or improve concrete floor. It is ideal for preparing the ground before placing a parquet or any type of tile. In addition, it can be used on previous tile, filling with the self -leveling mortar and then placing parquet or tile, with a rank of thickness of 5 to 50 mm, which will avoid an excessive increase in the height of the room.
Preparation and placement of the self -leveling mortar
This mortar is of great resistance, even with little thickness, and its preparation and placement are very simple. You do not need to have previous experience, so you can do it yourself or have a Manitas of trust.
It is a professional product with guaranteed results. You just have to follow the indicated steps, respect the amount of water mentioned and mix properly.
Preparation Instructions:
- Clean the old floor well, making sure it is dry, free of dust and not flexible.
- Pour 3.5 liters of clean water per 25 kg sack.
- Stir and mix, preferably with a low revolution electric blender. If it is not possible, you can do it by hand, dedicating about 5 minutes in kneading.
- No more water than indicated, as it will lose properties.
- Extends the material in a single layer between 5 and 50 mm using one Languador.
- Use a barbed roller if necessary to help release occluded air.
For more information, you can find numerous Tutorials writings and video that show that the application is very easy.
Product characteristics
- Interior use only.
- Suitable for soils with radiant heating.
- Pedestable pedestrian at 24 hours.
- Possibility of coating at 7 days.
- Bags of 25 kg.
- 5% discount When buying complete 50 sacks of 25 kg.
Calculate the amount of self -leveling mortar you need
It is required approximately 1.9 kg by m² and mm thick. Thus, by 20 m² at 4 mm thick, you will need 152 kg of self -leveling mortar.
Cleaning tips
To clean spots and fresh tools, a little water is enough. Dry, you will need to use mechanical means.