What amount of silica sand should be spread on newly installed artificial turf?
The recommended amount of silica sand to add to artificial turf after installation varies depending on the type and height of the turf, as well as the climatic conditions and intended use of the area.
In general, it is recommended to add around 5 kg of silica sand per square meter of artificial turf for a height of 30-40 mm. If the turf height is greater, a larger amount of silica sand may be needed to provide adequate support and stability.
It is important to ensure that the sand is distributed evenly over the entire surface of the artificial turf. It is also advisable to use a brushing machine to brush the sand into the turf fibers, which will help keep the fibers upright and prevent puddling on the turf.
It is important to follow the recommendations of the artificial turf manufacturer, as there may be differences in the amount of silica sand required depending on the type and quality of the artificial turf.
|
Artificial turf height |
Recommended amount of silica sand |
|
Up to 20 mm |
2-3 kg/m² |
|
20-30 mm |
3-5 kg/m² |
|
30-40 mm |
5-8 kg/m² |
|
More than 40 mm |
8-10 kg/m² |
Silica sand particle size for filling artificial turf.
The appropriate silica sand particle size for lifting the pile of artificial turf is between 0.3 and 0.6 mm. This size allows the sand to penetrate the artificial turf and lift the fibers, which improves the appearance and durability of the turf.
