Aibar Paver - Small-Format Concrete Paver

10,08 €
10,08 €

Delivery in 3–15 days

Tax included. Shipping calculated at checkout.
Tamaño
Envase
Color

Aibar Paver - Small-Format Concrete Paver

Aibar Paver: small format for striking patterns

The smaller the piece, the finer the pattern: curves come out smoother, borders sit tighter, and the whole looks like traditional stone paving. The Aibar Paver is a single-layer concrete paver measuring 6 × 9 × 19 cm, the compact format that excels on narrow paths, curves and combined patterns.

✅ Key advantages

  • Compact 9 × 19 piece: about 58 per m²: smooth curves and fine patterns with hardly any cutting.
  • Classic paver look: the small scale gives a sought-after old-town feel in gardens.
  • Four colors: Crema, Gris, Multicolor and Salmón, which can be combined in borders and checkerboard patterns.
  • 6 cm thick: suitable for heavy pedestrian traffic and light vehicles over a compacted base.
  • Cheaper full pallet: 720 units (≈ 12.3 m²) with a better price per piece.

🏗️ Recommended applications

  • Narrow paths and curved walkways
  • Patios and driveways with patterns
  • Borders, edgings and frames for large areas
  • Tree pits and surrounds for inspection chambers

📋 Technical specifications

  • Material: vibro-pressed single-layer concrete
  • Dimensions: 6 × 9 × 19 cm
  • Weight per piece: 2.1 kg
  • Pieces per m²: ≈ 58
  • Pack: 10 units (≈ 0.17 m²)
  • Pallet: 720 units = 12.3 m² (≈ 1,535 kg)
  • Colors: Crema, Gris, Multicolor and Salmón
  • Use: outdoor, pedestrian and light vehicles

🧰 Installation

  1. Excavate and compact 10–15 cm of crushed stone sub-base.
  2. Confine the perimeter with a curb or edging.
  3. Spread a leveled 3–4 cm sand bed.
  4. Lay in a staggered joint pattern following the layout; on curves, slightly open the outer joints.
  5. Compact with a protected plate compactor and sweep fine sand into the joints.

💡 Professional tip: this format is the best ally for large areas: use the Aibar as a perimeter edging and where the paving meets inspection chambers and walls, and fill the center with a larger paver. A high-end finish on a controlled budget.

Frequently Asked Questions

¿Cuántos adoquines necesito por metro cuadrado?

Unas 58 piezas por m² en el formato 9 × 19 cm. Añade un 5 % para cortes y repuestos.

¿Cuánto cubre el palet?

El palet trae 720 unidades, que cubren 12,3 m², y pesa alrededor de 1.535 kg.

¿Aguanta el paso de coches?

Sí, con 6 cm de grosor admite vehículo ligero sobre base de zahorra bien compactada y paño confinado con bordillo.

¿Se coloca con cemento?

No hace falta: colocación en seco sobre cama de arena de 3-4 cm, con juntas rellenas de arena fina. Así drena y se repara pieza a pieza.

¿Por qué elegir un formato pequeño?

La pieza menuda toma mejor las curvas, hace cenefas más finas y da aspecto de adoquinado antiguo. También es la mejor orla para paños de adoquín grande.

¿Puedo combinar colores?

Sí, los cuatro colores comparten formato y grosor: cenefas y damas se montan mezclando palets.

¿Resiste heladas?

Sí, es hormigón prensado de alta compacidad apto para exterior todo el año.

¿Por qué varía ligeramente el tono entre piezas?

El color va en masa con pigmentos minerales y cada fabricación tiene pequeñas variaciones. Mezcla piezas de varias zonas del palet al colocar.