Sepúlveda Multiformat Concrete Paver - 3 sizes for random layout
Sepúlveda Paver: three sizes on the same pallet for a random laying pattern
The Sepúlveda Paver is not a single piece: it is a combination of three sizes — 18x12, 12x12 and 9x12 cm — supplied mixed together on the same pallet, in non-splittable packs. It is designed this way on purpose, to be laid in a random pattern and achieve a cobblestone-style pavement, without the mechanical repetition of a single-size paver.
⚠️ Important before ordering: the three sizes are not sold separately. When you buy a square metre or a pallet of Sepúlveda you will receive all three sizes mixed in the factory proportion, not just the 18x12. If you need a single uniform size, the right product is the Lerma Paver or the Ujué Paver.
✅ Advantages
Random laying pattern as standard: the three sizes arrive already mixed, with no need to combine pallets or orders.
Cobblestone look: the mix of sizes breaks up the grid and gives a much more natural finish.
Two thicknesses: Sepúlveda 6 for pedestrian use and light traffic; Sepúlveda 8 for vehicle traffic.
Common width of 12 cm: all three pieces share the same width, so the courses close without awkward adjustments.
Wear: class 4 I, Xi<20 mm. Absorption: class 2B, X8<6%.
Intended use: pedestrian use, areas subject to vehicle traffic and roofs.
🧰 Installation
Excavate the foundation area and compact the natural ground, forming the drainage slope.
Spread and compact a crushed stone base of 15-20 cm for pedestrian use, or 25-30 cm if there will be vehicle traffic.
Lay a 3-5 cm layer of bedding sand, screeded level with a straightedge and left uncompacted.
Open several packs at once and keep the three sizes at hand: a random pattern only works well if you alternate sizes as you go, not by laying them in batches.
Confine the entire perimeter with a kerb or concrete edging so that the pavement does not spread apart.
Sweep silica sand into the joints, run the plate compactor with a rubber pad over it and repeat the sweeping a few days later.
📦 Formats and colours
Sepúlveda 6: 18x12x6 + 12x12x6 + 9x12x6 cm on the same pallet — grey and colour.
Sepúlveda 8: 18x12x8 + 12x12x8 + 9x12x8 cm on the same pallet — grey and colour.
Sizes are not supplied loose: the pallet is indivisible and comes with all three sizes mixed.
Shades available from the factory: grey, cream, red and black. Cream, red and black are priced under the Color value, which is how the manufacturer invoices them.
💡 Professional tip: with the Sepúlveda, the most common mistake is to lay all the large pieces first and leave the small ones for last: you end up with a floor split into two zones and there is no fixing it. Open three or four packs at once, also mix pieces from different pallets and alternate sizes course by course; this also spreads the shade variations from each batch so you don't get patches. Order 5-7% extra for cuts and finishing. And there is no leeway with thickness: 6 cm is for pedestrians and light cars; as soon as loaded vans or lorries come in, use 8 cm over a well-compacted crushed stone base.
Frequently asked questions
What is the Sepúlveda multi-format paver?
It is a combination of three sizes, 18x12, 12x12 and 9x12 cm, supplied mixed on the same pallet in non-splittable packs. It is designed to be laid in a random pattern, with a cobblestone look.
Can I buy only one of the sizes?
No, the three sizes are not sold separately: you receive all three mixed in the factory proportion. If you need a single uniform size, the Lerma Paver or the Ujué Paver are alternatives.
Which thickness should I choose?
There is Sepúlveda 6, for pedestrian use and light traffic, and Sepúlveda 8, for vehicle traffic.
How much does a pallet cover?
The Sepúlveda 6 pallet covers 8.88 m² and the Sepúlveda 8 pallet covers 6.74 m², both with approx. 64 pieces per m². They weigh approx. 1,199 and 1,200 kg actual weight respectively.
What colours is it available in?
The factory shades are grey, cream, red and black.
Todo excelente. Tras una primera equivocación con el producto elegido, el equipo de atención al cliente se puedo a trabajar para solucionar el problema y darme una solución adecuada.
