Skip to product information
  • Balaustre Cazorla de hormigón de 65 cm, para cerramientos de valla, balcón y escalera - Vetonek
  • Balaustre Cazorla de hormigón de 65 cm, para cerramientos de valla, balcón y escalera - Vetonek

Cazorla Baluster 65 cm - Choice of Four 15 × 15 cm Shaft Designs

38,81 €
38,81 €
Tax included. Shipping calculated at checkout.
Model
Format
Color

Cazorla Baluster 65 cm - Choice of Four 15 × 15 cm Shaft Designs

Cazorla Baluster 65 cm: what it is

It's the 15 × 15 × 65 cm baluster in the Cazorla collection, the widest square-section piece in the catalogue. It's made with no reinforcement and using modern precasting techniques, which avoids the rust stains and breakages that ruin reinforced balustrades after a few years. It's designed for enclosures with a particularly refined look: fences, balconies and staircase railings where the piece is seen up close.

✅ Key advantages

  • 15 × 15 cm base: wider than the standard series, giving the run more presence and a larger bearing surface.
  • No internal reinforcement: nothing to rust and split the piece; a flawless finish and great strength.
  • Four shaft designs: same size and same cap, four different turnings to match the style you want.
  • 14 to 18 kg per piece: weight that stabilises the run and is still manageable by hand.
  • Suited to staircases: with the 15 × 15 cm wedge at a 30° angle, the slope is handled with no cutting.

🏗️ Recommended applications

  • Classic-style fences and plot enclosures.
  • Balcony and terrace parapets.
  • Indoor and outdoor staircase railings.
  • Grand staircases and main entrances.

📋 Technical data sheet

  • Dimensions: 15 × 15 × 65 cm.
  • Weight per unit: 15.9 kg for design 1, 15.4 kg for design 2, 14.1 kg for design 3, and 17.8 kg for design 4.
  • Material: precast concrete, no reinforcement.
  • Colour: white.
  • Designs available: four shaft turnings, identical dimensions.
  • Units per pallet: 49 for designs 1, 2 and 3; 36 for design 4.
  • Anchor: galvanised dowel, 55 × Ø 0.8 cm.
  • Compensating wedge: 15 × 15 × 2.5 × 11.5 cm, at a 30° angle.
  • Use: indoor and outdoor.

🧰 Installation

  1. Level and clean the top of the wall or the supporting ring beam.
  2. Set out the spacing between centres end to end of the run before drilling.
  3. Fit the 55 × Ø 0.8 cm galvanised dowel at each marked point.
  4. Bed the baluster on a pat of bonding mortar, threading it onto the dowel.
  5. On a staircase, insert the 15 × 15 cm wedge under each piece to recover level.
  6. Fit the top cap, which ties the run together, and point the joints at the end.

📦 Available formats

  • Designs 1, 2 and 3: single unit or pallet of 49.
  • Design 4: single unit or pallet of 36.

💡 Professional tip: on a staircase railing, don't try to correct the slope by tilting the baluster: the piece has to stay plumb, and it's the 30° wedge under the base that absorbs the incline. If you force the tilt instead, the cap only bears on one edge, the joint opens at the top, and that's exactly where water gets in.

Frequently Asked Questions