Protects interior terracotta, extruded stoneware and rustic natural stone floors against wear from foot traffic and dirt, softening the texture, making maintenance easier and giving a natural matt finish.
Ideal as a finishing treatment over water-based waterproofing products.
Ideal for preventing dusting on interior natural stone walls and exposed brick, preserving the original matt appearance.
advantages
Provides a natural matt effect.
High concentration: it can be used neat (in the treatment phase) or diluted in water (in the maintenance phase).
If you want to increase the gloss level to achieve a satin effect, you can buff by rubbing with a mop or cloth.
Fully removable.
High self-levelling power and excellent adhesion.
Effectively repels dirt and dust.
The MATT finish maintains breathability at no less than 90% compared with the untreated material.
ideal for
TERRACOTTA
EXTRUDED STONEWARE
UNPOLISHED STONE AND TERRAZZO
TUFF
RESIN
Directions for use
Dilution: It can be used neat or diluted in water as needed. For the protection of floors and walls:
Dilute MATT slightly to make application easier by adding 200 ml of water per litre of product. On a clean, dry surface, apply MATT evenly with a brush, fleece applicator or other similar applicator. Wait until completely dry (at least 1 hour) and apply a second coat. Wait until completely dry before walking on the surface (at least one hour). If a satin finish is desired, simply buff afterwards by rubbing with a mop, a soft cloth or a buffing machine. On terracotta and highly absorbent stone (e.g. sandstone), first apply a coat of waterproofer such as W68 or FOB XTREME. Renewing the finish (e.g. every 2/3 months): once the surface has been cleaned with CLEANER PRO (diluted 1:200), apply MATT diluting 500 ml of product in 5 litres of water. Wait until completely dry before walking on the surface. Restoring the protection: strip the wax from the surface with the detergent PS87 PRO diluted 1:5 in water. Rinse. Once the floor is dry, apply the diluted wax (200 ml of water per litre of product) with a fleece applicator, brush or other similar applicator. For the anti-dusting treatment: on a dry surface, apply one coat of neat MATT with a brush. After 1 hour the surface is dry. CLEANING THE TOOLS: clean with water immediately after use. Maintenance: diluted solution of CLEANER PRO.
Warning
The product can be removed using the stripping detergent PS87 PRO. Do not apply in damp environments or on floors without adequate slopes that cause water to pool (showers, saunas, steam rooms, etc.). The product slightly revives the tone of the materials, so test first on a small area of the surface.
coverage
COVERAGE (1 litre):
Terracotta30 m²
Stone30-40 m²
Coverage is indicative and refers to a single application
sizes
5-litre plastic containers: boxes of 4 units
Frequently asked questions
What is MATT protective wax with a matt effect used for?
It protects interior terracotta, extruded stoneware and rustic natural stone floors against wear from foot traffic and dirt, with a natural matt finish. It is also used to prevent dusting on interior natural stone walls.
Which surfaces is it ideal for?
It is suitable for terracotta, extruded stoneware, unpolished stone and terrazzo, tuff and resin. Also for exposed brick and interior natural stone walls.
How is it applied?
On a clean, dry surface, it is applied evenly with a brush, fleece applicator or other similar applicator, slightly diluted with 200 ml of water per litre of product. Leave it to dry for at least 1 hour and apply a second coat.
What coverage does one litre provide?
According to the description, one litre covers approximately 30 m2 on terracotta and 30-40 m2 on stone. Coverage is indicative and refers to a single application.
What precautions should I take?
It must not be applied in damp environments or on floors without adequate slopes, such as showers, saunas or steam rooms. It slightly revives the tone of the materials, so it is advisable to test first on a small area.
