Lerma Rectangular Concrete Paver - 6 and 8 cm for walkways and light traffic

26,59 €
26,59 €
Tax included. Shipping calculated at checkout.
Size
Package
Color

Lerma Rectangular Concrete Paver - 6 and 8 cm for walkways and light traffic

Lerma Paver: the classic rectangular paving block

The Lerma Paver is the classic plain rectangular paving block, in 20x10 cm pieces with a thickness of 6 or 8 cm, and with the complementary Half Lerma 10x10x8 cm piece to finish edges and borders without cutting. Made of concrete to the UNE-EN 1338 standard.

✅ Advantages

  • Universal format: the 20x10 rectangle can be laid in rows, staggered, herringbone, or basket-weave patterns without needing special pieces.
  • Two thicknesses: 6 cm for pedestrian use and light traffic; 8 cm where vehicles will pass.
  • Finishing piece: the Half Lerma 10x10x8 solves edges, junctions, and direction changes without cutting pavers.
  • Certified strength: UNE-EN 1338, strength Xi>2.9 / X8>3.6 MPa and satisfactory breaking load X8>250 N/mm.
  • Wear and absorption: class 4 I (Xi<20 mm) and absorption class 2B (X8<6%).
  • Four factory colors: gray, cream, red, and black.

🏗️ Applications

  • Walkways, sidewalks, and garden paths.
  • Squares, courtyards, and pedestrian areas.
  • Home access, garage entrances, and driveway crossings.
  • Parking lots and roads with vehicle traffic, always with the 8 cm thickness.
  • Walkable roofs.

📋 Technical sheet

  • 20x10x6 cm: 50 pieces/m², 135 kg/m², pallet of 10.8 m² (540 pieces) and actual 1,458 kg.
  • 20x10x8 cm: 50 pieces/m², 178 kg/m², pallet of 8.64 m² (432 pieces) and actual 1,538 kg.
  • Half Lerma 10x10x8 cm: 100 pieces/m², 178 kg/m², pallet of 5.94 m² (594 pieces) and actual 1,057 kg.
  • Material: vibropressed concrete.
  • Standard: UNE-EN 1338. Strength Xi>2.9 / X8>3.6 MPa. Breaking load X8>250 N/mm.
  • Wear: class 4 I, Xi<20 mm. Absorption: class 2B, X8<6%.
  • Intended use: pedestrian use, areas subject to vehicle traffic, and roofs.

🧰 Installation

  1. Excavate the bed and compact the natural ground until it is firm and has the drainage slope.
  2. Spread and compact a 15-20 cm base of crushed aggregate in pedestrian areas, and 25-30 cm if vehicle traffic will pass.
  3. Lay a 3-5 cm bedding sand layer, leveled with a screed and without compacting.
  4. Lay the pavers dry, starting from a straight edge, mixing pieces from several pallets at once.
  5. Finish the whole perimeter with a curb or concrete edging: without confinement the pavement will spread apart.
  6. Sweep silica sand over the joints, run the vibrating plate with a rubber mat, and repeat the sand sweeping a few days later.

📦 Formats and colors

  • Lerma Paver 20x10x6 cm — gray and color.
  • Lerma Paver 20x10x8 cm — gray and color.
  • Half Lerma 10x10x8 cm — gray and color.
  • Available factory shades: gray, cream, red, and black. In the store, the cream, red, and black shades are priced under the Color value, which is how the manufacturer invoices them.

💡 Professional tip: always order 5-7% extra material for cuts, edge pieces, and breakages: replacing a loose pallet months later almost never matches the tone. During installation, mix pieces from three or four pallets at a time, because each batch has its own shade, and laying pallet by pallet will leave the floor blotchy. And don't overlook the thickness: 6 cm is for pedestrians and light cars; as soon as loaded vans or trucks come in, go for 8 cm on a well-compacted crushed-stone base. It is the most expensive buying mistake in this family.