The most economical format for those who weld every day. Steel MIG/MAG welding wire on a 15 kg spool, in 1.0 and 1.2 mm diameters, designed for workshops, metalwork shops and structural fabricators with continuous consumption.
A 15 kg spool reduces the cost per kilo and the number of spool changes over the week. It is the natural choice for workshop welders with a wire feeder for large spools and for series production of structures, trailers or metal joinery.
✅ Key benefits
15 kg spool: lower cost per kilo and fewer stops to change spools.
Two diameters: 1.0 mm for medium thicknesses and 1.2 mm for thick sheet.
Continuous feed: designed for long welding shifts.
For steel: the most common material in metalwork and structures.
🏗️ What it's for
Metalwork and metal joinery workshops.
Fabrication of structures, industrial buildings and trailers.
Boilermaking and series production.
Workshop MIG welders with room for a 15 kg spool.
📋 Technical features
Material: steel
Process: MIG/MAG with shielding gas
Diameters: 1.0 mm · 1.2 mm
Spool: 15 kg
1.0 or 1.2 mm
Choose 1.0 mm for medium thicknesses and 1.2 mm for thick sheet and higher-amperage machines. First check that your welder takes 15 kg spools: many compact machines only accept 1 or 5 kg spools.
💡 Vetonek tip: match the feed rollers and tip to the wire diameter and check the liner when you fit a new spool: a dirty liner slows the wire and causes an irregular arc.
Frequently asked questions
What diameters are available?
1.0 mm and 1.2 mm, both on a 15 kg spool.
Does my welder take 15 kg spools?
Only workshop machines with room for a large spool. Check your welder's manual before buying.
Does it need gas?
Yes, it is solid steel wire for MIG/MAG welding with shielding gas, such as CO2 or an argon-CO2 mix.
Which diameter should I choose?
1.0 mm for medium thicknesses and 1.2 mm for thick sheet and higher-amperage machines.
What roller and tip do I need?
A feed roller and contact tip of the same diameter as the wire: 1.0 or 1.2 mm.
Frequently Asked Questions
What diameters are available?
1.0 mm and 1.2 mm, both on a 15 kg spool.
Does my welder take 15 kg spools?
Only workshop machines with room for a large spool. Check your welder's manual before buying.
Does it need gas?
Yes, it is solid steel wire for MIG/MAG welding with shielding gas, such as CO2 or an argon-CO2 mix.
Which diameter should I choose?
1.0 mm for medium thicknesses and 1.2 mm for thick sheet and higher-amperage machines.
What roller and tip do I need?
A feed roller and contact tip of the same diameter as the wire: 1.0 or 1.2 mm.
Todo excelente. Tras una primera equivocación con el producto elegido, el equipo de atención al cliente se puedo a trabajar para solucionar el problema y darme una solución adecuada.
