Andosilla Cladding: the warmth of white Mediterranean stone
Looking for a bright façade that never goes out of style? Andosilla cladding reproduces the whitewashed masonry of Mediterranean houses with multi-format high-strength concrete pieces, in a light Natur shade that visually enlarges any space, indoors and outdoors.
✅ Advantages that make the difference
Integral water repellent: repels water throughout the entire thickness of the piece, not just on the surface.
Class A1 fireproof: highest reaction-to-fire classification, with no smoke emission.
Multi-format: pieces of different sizes that create a natural bond pattern, with no obvious repetition.
High strength: flexural strength above 3.5 MPa according to UNE-EN 15286.
10-year warranty under normal conditions of use.
🏗️ Applications
Ventilated and bonded façades, plinths, living rooms, bedrooms, fireplaces, headboard walls and commercial premises. Suitable for indoor and outdoor use.
📋 Technical data sheet
Material: integrally water-repellent concrete
Format: multi-format (installation with a 1-1.5 cm joint)
Color: Natur
Weight: approx. 47 kg/m²
Reaction to fire: A1
Flexural strength: >3.5 MPa (UNE-EN 15286)
📦 Contents per format
Format
Contents
Approx. weight
1 m²
2 boxes of ±0.5 m²
47 kg
20 m² pallet
40 boxes (20 m²)
965 kg
🧰 Installation
Check that the substrate is firm, clean and can support 30-50 kg/m².
Apply C2T tile adhesive using the double-buttering technique.
Mix pieces from several boxes to distribute the shade variations.
Leave a 1-1.5 cm joint and grout with mortar.
💡 Professional tip: on highly exposed façades, finish the top of the wall with a coping to prevent permanent water runoff over the cladding.
Frequently Asked Questions
¿Sirve para exterior?
Sí. Está hidrofugado en masa y soporta heladas y lluvia, por lo que es ideal para fachadas.
¿Cuánto cubre una caja?
Cada caja cubre aproximadamente 0,5 m² colocado con junta de 1-1,5 cm. El formato de 1 m² incluye 2 cajas.
¿Qué adhesivo necesito?
Cemento cola tipo C2T aplicado con doble encolado sobre soporte firme y limpio.
¿Se puede colocar en una chimenea?
Sí. Es ignífugo clase A1, la máxima clasificación de reacción al fuego.
