Skip to product information
  • Llave de impacto neumática 1/2" Vica Work - Vetonek
  • Llave de impacto neumática 1/2" Vica Work - Vetonek

1/2" pneumatic impact wrench with twin hammer

71,54 €
71,54 € 73,00 €
You save 2% (1,46 €)

Delivery in 3–15 days

Tax included. Shipping calculated at checkout.
Packaging

1/2" pneumatic impact wrench with twin hammer

The key tool in any tyre workshop: this Aeropro 1/2" impact wrench loosens and tightens wheel and suspension nuts in seconds thanks to its 610 Nm of torque.

Its twin hammer mechanism delivers more power with less vibration and greater durability. Lightweight composite body, rubberised grip, easy-to-use trigger and rear exhaust that does not blow in your face or raise dust.

✅ Key benefits

  • 610 Nm of torque: enough for wheel nuts and heavy-duty jobs.
  • Twin hammer: more power, less vibration and longer life.
  • Composite body: light and tough.
  • Rubberised grip: firm, comfortable hold.
  • Rear exhaust: keeps the work area clean.

🏗️ What it is for

  • Tyre and fast-fit workshops.
  • Suspensions, brakes and front axles.
  • Maintenance of agricultural machinery and fleets.
  • Assembly and disassembly of bolted structures.

📋 Technical specifications

  • Square drive: 1/2"
  • Maximum torque: 610 Nm
  • Speed: 7,500 rpm
  • Mechanism: twin hammer
  • Air consumption: 183.9 l/min
  • Air inlet: 1/4"
  • Recommended compressor: 3 HP
  • Body: composite, rubberised grip
  • Exhaust: rear
  • Packed weight: 2.1 kg
  • Packaging: 30 x 28 x 12 cm

💡 Pro tip: always use impact sockets (black, chrome molybdenum steel), never chrome-plated hand sockets, which can shatter. And when tightening wheels, do the final tightening with a torque wrench.

🔧 How to get the most out of it

Always use impact sockets and a hose with a quick coupler of good bore so that the full air flow gets through. Drain the water from the tank daily and put a few drops of pneumatic oil into the inlet before you start.

Frequently asked questions

What compressor do I need?

A 3 HP compressor with good air flow; the wrench uses about 184 l/min.

Can I tighten my car wheels with it?

Yes, to run the nuts in, but the final tightening must be done with a torque wrench to the manufacturer's torque.

What sockets does it use?

1/2" impact sockets. We have a set of 10 sockets from 11 to 24 mm.

What hose should I use?

A hose with an inside diameter of at least 8 mm so as not to lose air flow.

How is it maintained?

A few drops of pneumatic oil in the inlet before each use, and dry air.

Frequently Asked Questions

What compressor do I need?

A 3 HP compressor with good air flow; the wrench uses about 184 l/min.

Can I tighten my car wheels with it?

Yes, to run the nuts in, but the final tightening must be done with a torque wrench to the manufacturer's torque.

What sockets does it use?

1/2" impact sockets. We have a set of 10 sockets from 11 to 24 mm.

What hose should I use?

A hose with an inside diameter of at least 8 mm so as not to lose air flow.

How is it maintained?

A few drops of pneumatic oil in the inlet before each use, and dry air.