Cinca Wall Coping 50 cm - Chamfered with a Flat Zone for Fencing
Cinca Wall Coping: chamfered profile with a flat central strip
When you need to fit trellis or fencing on top of a wall, a double-slope coping doesn't give a proper seat, and a flat slab doesn't drain as well. The Cinca Wall Coping combines both: bevelled edges that carry water away and a flat central strip up to 16 cm wide for a secure anchor point. HAP concrete with no internal reinforcement.
✅ Key advantages
Flat central zone: up to 16 cm of firm seating for trellises, metal fencing and balustrades.
Side chamfers: water drains to both sides instead of sitting on the coping.
Built-in drip edge: keeps the wall clean and free of run-off stains.
No internal reinforcement: HAP concrete with no risk of rust.
4 colours: Grey, White, Beige and Black to match any façade.
🏗️ Recommended applications
Enclosure walls with trellis or metal fencing on top.
Base walls for balustrades.
Terrace parapets with an anchored railing.
Plot enclosures and boundaries between neighbours.
📋 Technical data sheet
Material: high-performance HAP concrete.
Profile: chamfered with a flat central strip and drip edge.
Sizes: 50 × 25 × 2.8 × 4.5 × 13 cm and 50 × 30 × 3.2 × 5 × 16 cm.
Flat strip: 13 cm and 16 cm respectively.
Colours: Grey, White, Beige and Black.
Reinforcement: none.
🧰 Installation
Level the top of the wall and mark its centre line with a string.
Dry-lay the course, keeping the flat strip centred.
Spread flexible bonding mortar with a continuous bead along both edges.
Bed each piece with equal overhang and level with a rubber mallet.
Leave a 3-5 mm joint and point it with elastic mortar.
Wait at least 48 hours before drilling to anchor any fencing.
📦 Available formats
Single unit.
Full pallet.
💡 Professional tip: to fix trellis, always use chemical anchors rather than expansion plugs. An expansion plug works by pushing outward, and on a piece just 3-5 cm thick, with no reinforcement and the chamfer nearby, it's likely to chip off a piece of the edge. With resin the load is spread evenly and the piece holds up perfectly.
