Semi-professional compressor 50 L - 3 HP, 9 bar and 358 L/min at V
It combines the three things you look for in a single-phase workshop compressor: high air flow (358 L/min), pressure with headroom (9 bar) and enough reserve (50 litres). With that, it can supply practically any intermittently used air tool without falling short.
The twin-cylinder V pump is what makes that air flow possible with just 3 HP: two cylinders working alternately, with less vibration and better cooling than a single pump pushed to the limit.
✅ Key benefits
9 bar pressure: one bar of headroom over the standard, which you will appreciate with a long hose.
358 L/min: air flow for demanding tools.
V pump: more performance and less vibration.
50-litre reserve to absorb consumption peaks.
Single-phase 230 V: no electrical work needed.
🏗️ What it is for
Mechanical workshops with impact wrenches and ratchets.
Spray painting and bodywork.
Carpentry and assembly air tools.
Workshops and garages with heavy daily but not continuous use.
📋 Technical specifications
Voltage: 230 V
Power: 3 HP
Maximum pressure: 9 bar
Air flow: 358 L/min
Speed: 2,850 rpm
Tank capacity: 50 litres
Pump: twin-cylinder V
💡 Pro tip: with 3 HP single-phase, it is the start-up that suffers. Never restart it immediately after stopping it with the tank under pressure: the unloader valve needs a few seconds to relieve the piston head, and if the motor has to start against pressure, the thermal cut-out ends up tripping or the capacitor burns out.
Frequently asked questions
What are the advantages of the V pump?
Two cylinders working alternately deliver 358 L/min with just 3 HP, with less vibration and better cooling than a single pump pushed to the limit.
How much pressure does it deliver?
Up to 9 bar, one bar more than the standard 8 bar, which you will appreciate with a long hose.
Is it suitable for continuous use in a workshop?
It is designed for heavy daily but not continuous use: it supplies intermittently used air tools. For non-stop air, there are continuous-duty compressors.
Can I restart it straight after stopping it?
It is not advisable with the tank under pressure. Wait a few seconds for the unloader valve to relieve the piston; if it starts against pressure, the thermal cut-out may trip or the capacitor may be damaged.
Does it need a special installation?
No. It is single-phase 230 V, with 3 HP and a 50-litre tank.
Frequently Asked Questions
What are the advantages of the V pump?
Two cylinders working alternately deliver 358 L/min with just 3 HP, with less vibration and better cooling than a single pump pushed to the limit.
How much pressure does it deliver?
Up to 9 bar, one bar more than the standard 8 bar, which you will appreciate with a long hose.
Is it suitable for continuous use in a workshop?
It is designed for heavy daily but not continuous use: it supplies intermittently used air tools. For non-stop air, there are continuous-duty compressors.
Can I restart it straight after stopping it?
It is not advisable with the tank under pressure. Wait a few seconds for the unloader valve to relieve the piston; if it starts against pressure, the thermal cut-out may trip or the capacitor may be damaged.
Does it need a special installation?
No. It is single-phase 230 V, with 3 HP and a 50-litre tank.