Skip to product information
  • Cortavarillas profesional Bellota 6009N
  • Cortavarillas Bellota 6009N, detalle de la cabeza
  • Cortavarillas Bellota 6009N, detalle de las cuchillas
  • Cortavarillas Bellota 6009N, empuñaduras de elastómero
  • Cortavarillas Bellota 6009N cortando ferralla
  • Cortavarillas profesional Bellota 6009N
  • Cortavarillas Bellota 6009N, detalle de la cabeza
  • Cortavarillas Bellota 6009N, detalle de las cuchillas
  • Cortavarillas Bellota 6009N, empuñaduras de elastómero
  • Cortavarillas Bellota 6009N cortando ferralla

Bellota 6009N Professional Rebar Cutter with Forged Blades for Cutting Rebar

72,48 €
72,48 €

Delivery in 3–15 days

Tax included. Shipping calculated at checkout.
Tamaño

📄 Ficha técnica del producto

Bellota 6009N Professional Rebar Cutter with Forged Blades for Cutting Rebar

Cut rebar, threaded rod, chain or welded wire mesh on site without an angle grinder: the Bellota 6009N rod cutter multiplies your strength to cut through steel with a clean, safe cut. Available in five sizes, from the handy 450 mm to the powerful 1050 mm for rod up to 19 mm.

The blades are forged in one piece and their induction-hardened edges offer maximum durability and wear resistance. They are adjusted by means of eccentric bolts that keep the edges perfectly aligned, and the notches on the bolt head prevent it from turning. The closed handle has elastomer grips that stop your hand from slipping.

  • Blades forged in one piece
  • Induction-hardened edges: 58 HRc
  • Eccentric bolts to align the edges
  • Closed handle with non-slip elastomer grips
  • Replaceable head and bolts

Technical specifications

Reference Length Soft rod Hard rod Extra-hard rod Dimensions Weight
6009-450 N 465 mm 8 mm 6 mm 5.5 mm 140 x 465 x 40 mm 1.46 kg
6009-600 N 615 mm 10 mm 8 mm 7 mm 120 x 615 x 42 mm 2.56 kg
6009-750 N 770 mm 13 mm 9 mm 8 mm 180 x 770 x 50 mm 4.8 kg
6009-900 N 915 mm 16 mm 10 mm 9 mm 190 x 915 x 57 mm 5.0 kg
6009-1050 N 1065 mm 19 mm 11 mm 10 mm 230 x 1065 x 63 mm 7.95 kg

Frequently asked questions

What materials does the Bellota 6009N rod cutter cut?

It is used to cut rebar, threaded rod, chain or welded wire mesh on site without needing an angle grinder. It multiplies your strength to cut through steel with a clean, safe cut.

What sizes is it available in?

There are five sizes: 450, 600, 750, 900 and 1050 mm nominal, with actual lengths of 465, 615, 770, 915 and 1065 mm. The largest cuts rod up to 19 mm.

What diameter does each model cut?

In soft rod: 8 mm for the 450, 10 mm for the 600, 13 mm for the 750, 16 mm for the 900 and 19 mm for the 1050. In hard rod it cuts from 6 to 11 mm and in extra-hard rod from 5.5 to 10 mm, depending on the size.

What are the blades like and can they be repaired?

The blades are forged in one piece with 58 HRc induction-hardened edges. The head and bolts are replaceable, and the eccentric bolts keep the edges aligned.

How much does each size weigh?

The weight ranges from 1.46 kg for the 450 mm model to 7.95 kg for the 1050 mm one. The closed handle has non-slip elastomer grips.

Frequently Asked Questions

Which size of rebar cutter do I need?

It depends on the diameter: the 450 mm cutter cuts soft rod up to 8 mm and the 1050 mm one up to 19 mm. Check the table for hard and extra-hard rod.

Can the blades be replaced?

Yes, Bellota offers replacement heads and screw sets for every size of the 6009N rebar cutter.

How are the cutting edges kept aligned?

With off-centre pivot screws that allow the blades to be adjusted; their notches stop them from working loose.

What else can it cut?

Besides rebar, it can be used for threaded rod, bolts, chains and mesh, always within its cutting capacity.