Bellota 8050 Nylon-Faced Hammer with Beech Wood Handle for Mark-Free Striking
Some parts have to be struck without leaving a mark: painted sheet metal, profiles, furniture or machined parts. The Bellota 8050 hammer has a metal head with interchangeable nylon faces, which allow striking and adjusting without marking or damaging the surface.
The PEFC-certified beech wood handle is ergonomic and the joint with the head is secured by a patented fibreglass wedge so that it does not work loose. When the nylon faces wear, they are replaced with Bellota BB8050 replacement faces.
Nylon faces that do not mark the parts
Replaceable faces (BB8050)
Metal head
Ergonomic handle in PEFC-certified beech wood
Fibreglass wedge patented by Bellota
Technical specifications
Reference
Face diameter
Handle length
Grip diameter
Dimensions
Total weight
8050-25
25 mm
27 cm
26 mm
100 x 270 x 25 mm
0.25 kg
8050-32
32 mm
27 cm
29 mm
102 x 270 x 32 mm
0.35 kg
8050-38
38 mm
27 cm
31 mm
110 x 270 x 38 mm
0.53 kg
8050-44
44 mm
31.5 cm
33 mm
120 x 315 x 40 mm
0.77 kg
Frequently asked questions
What is the Bellota 8050 hammer used for?
It is used to strike without leaving a mark on painted sheet metal, profiles, furniture or machined parts. The metal head has interchangeable nylon faces that allow striking and adjusting without marking or damaging the surface.
Can the faces be replaced?
Yes, when the nylon faces wear, they are replaced with Bellota BB8050 replacement faces, so you can keep the hammer without replacing the head or the handle.
What is the handle made of and how is the head secured?
The handle is ergonomic, made of PEFC-certified beech wood, and the joint with the head is secured by a patented fibreglass wedge so that it does not work loose.
What face diameters are available?
There are four versions with 25, 32, 38 and 44 mm faces. The total weight ranges from 0.25 kg for the 25 mm to 0.77 kg for the 44 mm.
Frequently Asked Questions
Why nylon faces?
Because they allow parts to be struck and adjusted without marking or damaging them.
Can the faces be changed?
Yes, with Bellota BB8050 replacement faces of the same diameter.
Which size should I choose?
25 and 32 mm for small parts and assembly; 38 and 44 mm for large parts and heavier blows.
What jobs is it used for?
Striking and adjusting parts, mainly sheet metal or steel, and delicate assemblies.
Todo excelente. Tras una primera equivocación con el producto elegido, el equipo de atención al cliente se puedo a trabajar para solucionar el problema y darme una solución adecuada.
