Todo genial
"Ya van muchos pedidos en Ventonek. Buenos precios y buenos productos. No puedo pedir mas. Solo hecho en falta mas informacion o la ficha tecnica de cada producto en caso de productos agricolas."
How much stone do I need for the ground?
For pebble and gravel:
• approximately 80kg per m², based on a 5cm layer.*For particle sizes >32mm, a thicker layer is required.
• Consumption per sack: 1000kg = 0.625m³.
• Coverage: approximately 12.5m² with a 5 cm layer.
For pine bark:
• approximately 70L per m², based on a 5cm layer.
• Consumption per sack: 1000L = approximately 1m³ = approximately 600kg
• Coverage: approximately 14m² with a 5 cm layer.
For volcanic, slate and chamotte:
• approximately 50kg per m², based on a 5cm layer.
• Consumption per sack: 1000kg = approximately 1m³
• Coverage: approximately 20m² with a 5 cm layer
How much stone do I need to fill a gabion?
Density of approximately 1,650kg per 1m³.
The calculation is very easy to understand with an example: if you have a gabion of 100x50x30 cm, you must do the following calculations:
1x0.5x0.3 = 0.15m³
0.15x1,650 = 247.50kg of stone.
*It is always a good idea to calculate an extra 5%, since when gabions are filled they expand a little and a little more stone always fits than in the theoretical calculations.
ATTENTION!
The grain sizes of GRAVELS AND pebbles are sieve sizes
The actual sizes may vary slightly, since when talking about, for example, 60-80mm stone, it means that the stones pass through an 80x80mm square mesh and do not pass through a 60x60mm one.
Through that 80x80 mesh, a stone 100mm long and 65mm wide can pass, so there may be a percentage of stones larger than 80 and smaller than 60mm.
Breakage of pebbles
On the other hand, in pebbles larger than 60mm, there is a percentage of up to 10% of stones that can break during sorting, washing, loading and unloading; to this day we do not have machinery that prevents such breakages.
In the photos you can see, only real products are shown; broken pieces have not been removed.
Dust and sand in the products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; the stone will wash itself over time or you can pour water on it before using it.
This homogeneous mix of dolomite lime and agricultural gypsum is designed to provide a comprehensive solution for soil improvement and correction. It provides essential nutrients and optimizes soil pH, starting to act from the very first moment thanks to its ultrafine granulation of 100 microns.
Composition:
Properties and Benefits:
pH and Acidity Neutralization:
Soil Structure Improvement:
Nutritional Contribution:
Optimization of Calcium/Magnesium Ratio:
Versatility:
Recommended Applications:
Usage Instructions:
Precautions:
Conclusion: The mix of dolomite lime and agricultural gypsum amplifies the individual benefits of each component, providing a more complete and holistic solution for soil improvement. This combination allows for a soil management strategy that is both broad and deeply effective, which can be especially valuable in soils that present multiple challenges. Ideal for various agricultural contexts and a variety of crops, it promises to improve yields and the quality of harvests.
Overall rating: 5.0 / 5 from 3 reviews.
Review topics: [].
"Ya van muchos pedidos en Ventonek. Buenos precios y buenos productos. No puedo pedir mas. Solo hecho en falta mas informacion o la ficha tecnica de cada producto en caso de productos agricolas."
"Genial y Rapidez en la entrega, Sois unos Cracks todo Correcto"
"Genial"