Fill gravel
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.
Fill gravel
Fill gravel: economic solution for construction and landscaping
Our filling gravel represents the most affordable option for a wide variety of construction and landscaping needs. This mixture of different gravels is ideal for filling ditches, leveling soils and adjusting uneven areas, providing a solid and reliable base for any project.
Efficiency and versatility
Presented in Big Bags of 1,000 kg, equivalent to 0.625 m³, our filling gravel is easy to handle and apply, guaranteeing that you can cover large areas quickly and efficiently. Its versatile composition makes it perfect for a variety of uses in the construction and landscaping sector, from the preparation of land to support for new structures.
Promotes effective drainage
In addition to its structural applications, filling gravel is excellent for facilitating water drainage. Its ability to allow the passage of water through its particles avoids accumulations and stagnations, which is crucial in moisture prone areas or in projects that require good water management.
Economic and lasting
Opt for our filling gravel if you are looking for an effective and economical solution that does not compromise quality. It is the ideal choice for projects that require large volumes of material at an accessible cost, providing durability and stability without excessive expense.
Choose the Vetonek filling gravel for your next construction or leveling project and experience the perfect combination of economy, functionality and quality. Visit our website for more information and to make your order.