Hydroponic substrate | 70% coconut fiber + 30% perlita
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.
Hydroponic substrate | 70% coconut fiber + 30% perlita
Our coconut + perlite hydroponic substrate is the perfect choice for growers seeking to promote an optimal growth environment. This substrate combines the high quality coconut fiber, which has been carefully washed, steamed, stamped, and optimally prepared, with perlite to guarantee an airy structure that favors exceptional root development.
Components and preparation process:
- Coconut fiber: We select coconut fibers that have been prosecuted to eliminate salts and stabilize the pH, ensuring a clean and ready growth means for use. This process includes washing, steamed and print, preparing the fiber to be the ideal culture medium.
- Perlita: We add perlite to the substrate to improve aeration. This key component allows roots to breathe properly, which is essential for energy production from sugars and for healthy and vigorous root growth.
Key benefits:
- Improves aeration: The perlite increases the porosity of the substrate, allowing an optimal flow of oxygen to the roots.
- Optimal Structure: The combination of coconut and perlita creates a perfect structure that maintains the solution of nutrients effectively, facilitating absorption by the roots.
- Healthy root development: It promotes a strong and healthy root system, essential for the support and nutrition of the plant.
- Rapid growth of plants: The excellent oxygenation and nutrition allow an accelerated development of plants.
Applications: This substrate is ideal for a wide range of hydroponic crops, from vegetables to ornamental flowers, providing the perfect conditions for healthy and fast growth.
INSTRUCTIONS FOR USE:
- Moisten slightly before using to facilitate planting or transplantation.
- Ensure good drain to avoid waterlogging.
- Monitor moisture and adjust irrigation as necessary to maintain an optimal growth environment.
Presentation: Available in 25 liter and 1,000 liter bags to adapt both to small personal projects and large commercial operations.
With our coconut + perlite hydroponic substrate, we offer a higher culture medium that ensures the success and health of your crops. It raises the quality of your hydroponic production with our specialized mixture, designed for the conscious and demanding cultivator.