Skip to product information
  • Camisa ignifuga y antiestatica Velilla 605003 - Vetonek
  • Camisa ignifuga antiestatica azul navy Velilla 605003 - Vetonek
  • Camisa ignifuga y antiestatica Velilla 605003 - Vetonek
  • Camisa ignifuga antiestatica azul navy Velilla 605003 - Vetonek

Flame-retardant antistatic long-sleeve shirt

34,56 €
34,56 € 42,53 €
You save 18% (7,97 €)

Delivery in 3–15 days

Tax included. Shipping calculated at checkout.
Color
Size

Flame-retardant antistatic long-sleeve shirt

Velilla 605003 flame-retardant antistatic shirt: the lightweight option in flame-retardant workwear

Long-sleeved shirt in treated cotton twill of 250 g/m² with antistatic fibre, certified to EN ISO 11612 (A1 B1 C1 F1), EN ISO 11611 class 1 A1 and EN 1149-5. It is the lightest upper-body garment in the range: 20 g/m² less than the jacket, without giving up certification.

✅ Features

  • Protection against heat and flame: EN ISO 11612 with performance levels A1 (limited flame spread), B1 (convective heat), C1 (radiant heat) and F1 (molten metal splash by contact).
  • Suitable for welding: EN ISO 11611 class 1 A1, the level intended for welding techniques that generate little spatter.
  • Antistatic: EN 1149-5, with 3% antistatic fibre integrated into the fabric.
  • Central closure with concealed snap fasteners: the snaps are covered, with no metal exposed to spatter.
  • Hook-and-loop cuffs: they fit snugly over the glove and leave no gap at the wrist.
  • Two patch chest pockets with flap and hook-and-loop closure and a reinforced back yoke.

👷 What jobs it is for

  • Welding and related work within the scope of class 1 of EN ISO 11611.
  • Chemical and petrochemical industry with an antistatic requirement.
  • Industrial maintenance in areas with flame risk, during hot weather.
  • Foundry work and handling of hot metal, within level F1.
  • Industrial assembly and construction involving hot work.

📋 Technical specifications

  • Velilla reference: 605003.
  • Composition: twill, 97% cotton - 3% antistatic fibre.
  • Weight: 250 g/m².
  • EN ISO 11612: A1, B1, C1, F1.
  • EN ISO 11611: class 1, A1.
  • EN 1149-5: electrostatic properties.
  • Sleeve: long, with hook-and-loop cuff.
  • Closure: central, with concealed snap buttons.
  • Pockets: 2 chest pockets, patch style, with flap and hook-and-loop closure.
  • Color: navy blue.
  • Sizes: S, M, L, XL, 2XL and 3XL.

🧺 Care

  • Always follow the label: for a category III PPE, the washing cycle is part of the certification. Washing outside the instructions may invalidate the protection.
  • No fabric softener: it leaves a film on the fibre that degrades both the antistatic and the flame-retardant performance.
  • No bleach or chlorine-based stain removers: they attack the cotton's treatment.
  • Check before every use: a tear, a burn or an open seam takes the garment out of service.

💡 Tip: never wear it with the sleeves rolled up. The protection of a flame-retardant shirt is the surface it covers: with the sleeve pushed up, the forearm is left bare, right in the area that receives spatter when welding. If it's hot, the answer is this 250 g/m² shirt instead of the 270 g/m² jacket, not rolling up the sleeves of the one you're wearing. And keep in mind that it is not certified against electric arc (IEC 61482).

Frequently asked questions

Which standards does this shirt meet?

It is certified to EN ISO 11612 (A1 B1 C1 F1), EN ISO 11611 class 1 A1 and EN 1149-5. It is a category III PPE, made of treated cotton twill with antistatic fibre.

Is it suitable for welding?

Yes, it meets EN ISO 11611 class 1 A1, the level intended for welding techniques that generate little spatter. It must not be worn with the sleeves rolled up, because the forearm would be left unprotected.

Does it protect against electric arc?

No, this shirt is not certified against electric arc (IEC 61482). Its protection covers heat and flame, welding and the electrostatic properties indicated.

What sizes and color does it come in, and what features does it have?

It is long-sleeved, navy blue, in sizes S to 3XL. It has a central closure with concealed snap fasteners, hook-and-loop cuffs and two chest pockets with flap and hook-and-loop closure.

How should I wash it?

Always follow the label, because for a category III PPE washing is part of the certification. Do not use fabric softener or bleach, and check it before every use.

Frequently Asked Questions

Which standards does it meet?

EN ISO 11612 (A1 B1 C1 F1), EN ISO 11611 class 1 A1 and EN 1149-5.

Is it suitable for electric arc?

No. This reference is not certified to IEC 61482.

Can I roll up the sleeves if it is hot?

No. With the sleeve rolled up, the forearm is bare exactly where spatter lands when welding.

Why choose the shirt rather than the jacket?

Because it weighs 250 g/m² compared with the 270 of the 606003 jacket and keeps the same certification.

What is it made of?

Twill, 97% cotton - 3% antistatic fibre.

How should it be washed?

According to the label, without fabric softener or bleach; the wash cycle is part of the certification.

Which trousers does it go with?

With the 603003 flame-retardant trousers.