24 L belt compressor for stipple paint - 3 HP, 10 bar and idle running
The spraying-ready version of the 3 HP belt-driven compressor. The difference lies in the idle running system: when the tank reaches pressure, the motor does not stop, it keeps running unloaded.
That matters far more than it seems when spraying textured finishes. A normal compressor starts and stops dozens of times an hour, and every start is a current peak and a mechanical jolt. With idle running, the motor starts once in the morning and never has to strain again: less wear, fewer thermal cut-outs and much more stable pressure at the gun, which for textured coatings translates directly into an even finish.
✅ Key benefits
Idle running: the motor does not keep starting and stopping, it simply unloads.
Stable pressure at the gun: an even textured finish from start to finish.
10 bar and 365 L/min with belt drive at 1,375 rpm.
Fewer current peaks: ideal when the site electrical supply is limited.
Compact 24-litre format with wheels to move it around the property.
🏗️ What it is for
Spraying textured coatings and emulsion paint.
Sprayed mortars and renders.
Spray painting large surfaces.
Any job requiring continuous air for hours.
📋 Technical specifications
Voltage: 230 V
Power: 3 HP
Maximum pressure: 10 bar
Air delivery: 365 L/min
Speed: 1,375 rpm
Tank capacity: 24 litres
Drive: belt
System: idle running
💡 Pro tip: idle running has a downside worth knowing about: the motor uses power even when it is not compressing. If you are going to take a long break, switch it off at the switch rather than leaving it unloaded throughout lunch. And at the end of the day, always switch it off at the switch, not by unplugging it: the unloader valve needs to release pressure before the next start.
Frequently asked questions
What is idle running?
When the tank reaches pressure, the motor does not stop: it keeps running unloaded. This avoids constant starting and stopping, with less wear and fewer thermal cut-outs.
Why is it useful for spraying textured coatings?
The pressure at the gun is more stable, giving a more even finish. It delivers 365 L/min at 10 bar with 3 HP, and is also suitable for emulsion paint or sprayed renders.
What should I do during a long break?
With idle running the motor keeps using power, so it is best to switch it off at the switch. At the end of the day, also switch it off at the switch rather than unplugging it, so the unloader valve releases the pressure.
Do I need three-phase power?
No. It is a 230 V single-phase unit. With 3 HP, check with an electrician that the site or household circuit can handle its consumption.
Can it be moved around the site?
Yes, it is compact, with a 24-litre tank, and has wheels. Place it level and well ventilated, and drain the condensate from the tank after use.
Frequently Asked Questions
What is idle running?
When the tank reaches pressure, the motor does not stop: it keeps running unloaded. This avoids constant starting and stopping, with less wear and fewer thermal cut-outs.
Why is it useful for spraying textured coatings?
The pressure at the gun is more stable, giving a more even finish. It delivers 365 L/min at 10 bar with 3 HP, and is also suitable for emulsion paint or sprayed renders.
What should I do during a long break?
With idle running the motor keeps using power, so it is best to switch it off at the switch. At the end of the day, also switch it off at the switch rather than unplugging it, so the unloader valve releases the pressure.
Do I need three-phase power?
No. It is a 230 V single-phase unit. With 3 HP, check with an electrician that the site or household circuit can handle its consumption.
Can it be moved around the site?
Yes, it is compact, with a 24-litre tank, and has wheels. Place it level and well ventilated, and drain the condensate from the tank after use.
Todo excelente. Tras una primera equivocación con el producto elegido, el equipo de atención al cliente se puedo a trabajar para solucionar el problema y darme una solución adecuada.
