Skip to product information
  • Compresor de 50 L y 2,5 HP Vica Work - Vetonek
  • Compresor de 50 L y 2,5 HP Vica Work - Vetonek

50 L and 2.5 HP compressor - 205 L/min with two air outlets

165,62 €
165,62 € 169,00 €
You save 2% (3,38 €)

Delivery in 3–9 days

Tax included. Shipping calculated at checkout.
Packaging

50 L and 2.5 HP compressor - 205 L/min with two air outlets

The most balanced configuration in the direct-drive range: 2.5 HP, 205 L/min and a 50-litre tank. Enough air delivery to drive real tools and enough reserve so you are not hearing the motor every two minutes.

It includes two independent air outlets and thermal protection. It runs from a 230 V socket, moves on wheels and is the compressor that handles the daily work of a small workshop or a well-equipped garage.

✅ Key benefits

  • 205 L/min at 8 bar with a 50-litre reserve behind it.
  • Fewer start cycles: the motor rests and lasts longer.
  • Two air outlets for two connected tools.
  • Thermal protection against overheating.
  • Single-phase 230 V: no special electrical installation needed.

🏗️ What it is for

  • Mechanical workshop: impact wrench, ratchet, inflating and blowing.
  • Carpentry and assembly with high-rate nailers.
  • Spray painting parts and furniture.
  • Building work, renovations and general maintenance.

📋 Technical specifications

  • Voltage: 230 V
  • Power: 2.5 HP
  • Maximum pressure: 8 bar
  • Air delivery: 205 L/min
  • Speed: 2,850 rpm
  • Tank capacity: 50 litres
  • Air outlets: 2
  • Thermal protection: yes

💡 Pro tip: a 1/2" impact wrench uses around 200-300 L/min in intermittent use. With 205 L/min it is tight but it works for tightening and loosening wheels; what you will not be able to do is sand or blast, because those are continuous demands above 300 L/min. Choose according to your tool's air consumption, not the size of the tank.

Frequently asked questions

Is it suitable for an impact wrench?

An impact wrench in intermittent use consumes around 200-300 L/min. With 205 L/min it is tight, but it works for tightening and loosening wheels; it is not suitable for sanding or blasting.

What is the difference from the 2 HP 50-litre model?

It steps up from 2 HP to 2.5 HP and from 195 to 205 L/min, keeping the 50-litre tank and the two air outlets.

Can I use two tools at the same time?

Yes, it has two independent outlets, but there is only one 205 L/min air delivery and it is shared between them.

What matters more, tank size or air delivery?

Choose according to your tool's consumption in L/min. The 50-litre tank reduces the number of starts, but it does not replace the air delivery your tool needs.

Does it need a special electrical installation?

No. It is a 230 V single-phase unit with thermal protection and runs on wheels.

Frequently Asked Questions

Is it suitable for an impact wrench?

An impact wrench in intermittent use consumes around 200-300 L/min. With 205 L/min it is tight, but it works for tightening and loosening wheels; it is not suitable for sanding or blasting.

What is the difference from the 2 HP 50-litre model?

It steps up from 2 HP to 2.5 HP and from 195 to 205 L/min, keeping the 50-litre tank and the two air outlets.

Can I use two tools at the same time?

Yes, it has two independent outlets, but there is only one 205 L/min air delivery and it is shared between them.

What matters more, tank size or air delivery?

Choose according to your tool's consumption in L/min. The 50-litre tank reduces the number of starts, but it does not replace the air delivery your tool needs.

Does it need a special electrical installation?

No. It is a 230 V single-phase unit with thermal protection and runs on wheels.