Welding connector adapter, 10-25 female to 35-50 male
Connect your 10-25 mm² cables and clamps to a welder with 35-50 mm² sockets without changing your cabling. It is common to have a set of cables or a torch with a small connector and a new machine with large sockets, or vice versa. This adapter solves the incompatibility in seconds: 10-25 female at one end and 35-50 male at the other, so you can plug in and keep welding.
It is a small part that saves you buying a new set of cables or a different torch just because the connector does not fit. Keep it in your toolbox and use it both in the workshop and on site.
Benefits
Instant savings: reuse 10-25 cables, clamps and torches on 35-50 machines.
Quick connection: plugs in like a standard connector, no tools needed.
Compact: fits in any case alongside your consumables.
Versatile: suitable for stick welding (MMA) and for TIG torches with a 10-25 connector.
What it is for
Using a 10-25 earth clamp or electrode holder on a welder with 35-50 sockets.
Fitting a TIG torch with a 10-25 connector to a machine with large sockets.
Reusing your old cabling when you change welder.
Technical specifications
Type: welding connector adapter
End 1: female for 10-25 mm² cable connectors
End 2: male for 35-50 mm² sockets
Model: AW-M00581SP
Supplied as: single unit
Vetonek tip
Always work within the current rating of the smaller cable (the 10-25 mm² one). Make sure the adapter is pushed fully home and turned until it locks: a loose connection heats up and burns the sockets. Do not use it in damp conditions without protection.
Frequently asked questions
What is this adapter for?
To connect a cable, clamp or torch with a 10-25 mm² connector to a welder that has 35-50 mm² sockets.
Does the weld lose power?
No, as long as you respect the maximum current rated for the 10-25 mm² cable. The current flows just as it does through a direct connection.
Does it work the other way round, from 35-50 to 10-25?
No. This model is 10-25 female and 35-50 male: it plugs into the large socket on the machine and takes the small connector.
Can I use it with a TIG torch?
Yes, if the torch has a 10-25 connector and your machine has 35-50 sockets. The gas is connected separately, depending on your welder's system.
Do I need tools to fit it?
No. Insert it into the socket and turn it until it locks, just like any quick-fit welding connector.
Frequently Asked Questions
What is this adapter for?
To connect a cable, clamp or torch with a 10-25 mm² connector to a welder that has 35-50 mm² sockets.
Does the weld lose power?
No, as long as you respect the maximum current rated for the 10-25 mm² cable. The current flows just as it does through a direct connection.
Does it work the other way round, from 35-50 to 10-25?
No. This model is 10-25 female and 35-50 male: it plugs into the large socket on the machine and takes the small connector.
Can I use it with a TIG torch?
Yes, if the torch has a 10-25 connector and your machine has 35-50 sockets. The gas is connected separately, depending on your welder's system.
Do I need tools to fit it?
No. Insert it into the socket and turn it until it locks, just like any quick-fit welding connector.
Todo excelente. Tras una primera equivocación con el producto elegido, el equipo de atención al cliente se puedo a trabajar para solucionar el problema y darme una solución adecuada.
