Belt compressor 100 L - 3 HP and 336 L/min with V-head
It runs at 1,100 rpm, the lowest speed in the entire single-phase range. That figure is what really determines a compressor's service life: fewer revolutions mean less friction, lower temperature and a pump head that can keep working trouble-free for fifteen years.
It combines belt drive with a V-twin pump head and a 100-litre tank. It is the classic configuration for a fixed workshop compressor: plenty of reserve, a constant air delivery of 336 L/min and operation from a 230 V socket, with no need for three-phase power.
✅ Key benefits
Only 1,100 rpm: the lowest speed in the single-phase range, and the longest-lasting.
Lubricated and repairable V-twin pump head.
100-litre tank: long, well-spaced cycles.
336 L/min sustained for several air outlets.
Single-phase: workshop power without a special electrical installation.
🏗️ What it is for
Fixed air installation in a mechanical or bodywork workshop.
Prolonged daily use with air tools.
Spray painting and finishing work.
Carpentry, assembly and industrial maintenance.
📋 Technical specifications
Voltage: 230 V
Power: 3 HP
Maximum pressure: 8 bar
Air delivery: 336 L/min
Speed: 1,100 rpm
Tank capacity: 100 litres
Drive: belt
Pump head: V-twin
💡 Pro tip: check the belt tension every six months. Pressed with a finger at the midpoint between the pulleys, it should give by about one centimetre: if it slips you lose air delivery without noticing and the belt glazes; if it is too tight you will wear out the motor bearings. It takes a minute and hardly anyone does it.
Frequently asked questions
Does this compressor need a three-phase installation?
No. It is a 230 V single-phase unit and works from a 230 V socket. As the motor is 3 HP, a circuit with suitable protection is advisable; consult your electrician.
What is the advantage of running at 1,100 rpm?
According to the data sheet it is the lowest speed in the single-phase range. Fewer revolutions mean less friction and a lower temperature in the V-twin pump head, which is lubricated and repairable.
Is it suitable for a mechanical or carpentry workshop?
Yes. It delivers 336 L/min with a 100-litre tank and belt drive, designed for daily use. It powers impact wrenches, sanders or a spray gun; if several workstations are in use at the same time, add up their consumption.
What basic maintenance does it need?
Check the belt tension every six months: at the midpoint between the pulleys it should give by about one centimetre. As the pump head is lubricated, monitor the oil level and change it according to the manufacturer's manual.
How should I install it?
In a well-ventilated place on a level floor. It is better to stand it on rubber anti-vibration mounts than to fix it rigidly. Drain the condensed water from the tank regularly.
Frequently Asked Questions
Does this compressor need a three-phase installation?
No. It is a 230 V single-phase unit and works from a 230 V socket. As the motor is 3 HP, a circuit with suitable protection is advisable; consult your electrician.
What is the advantage of running at 1,100 rpm?
According to the data sheet it is the lowest speed in the single-phase range. Fewer revolutions mean less friction and a lower temperature in the V-twin pump head, which is lubricated and repairable.
Is it suitable for a mechanical or carpentry workshop?
Yes. It delivers 336 L/min with a 100-litre tank and belt drive, designed for daily use. It powers impact wrenches, sanders or a spray gun; if several workstations are in use at the same time, add up their consumption.
What basic maintenance does it need?
Check the belt tension every six months: at the midpoint between the pulleys it should give by about one centimetre. As the pump head is lubricated, monitor the oil level and change it according to the manufacturer's manual.
How should I install it?
In a well-ventilated place on a level floor. It is better to stand it on rubber anti-vibration mounts than to fix it rigidly. Drain the condensed water from the tank regularly.
Todo excelente. Tras una primera equivocación con el producto elegido, el equipo de atención al cliente se puedo a trabajar para solucionar el problema y darme una solución adecuada.
