Belt compressor 200 L - 3 HP and 365 L/min, single-phase or three-phase
A two-hundred-litre tank with a 3 HP unit. It may seem out of proportion, but it is exactly the opposite: with such a large tank the compressor runs very long, widely spaced cycles, works cool and spends most of the day at rest. It is the configuration that delivers the most years of service per euro invested.
It delivers 365 L/min at 10 bar at only 1,375 rpm, with belt drive. Available in single-phase 230 V and three-phase 400 V.
✅ Key benefits
200 litres: the largest reserve in the 3 HP range.
Widely spaced cycles: the motor works little and lasts a long time.
365 L/min at 10 bar with belt drive.
Single-phase or three-phase to suit your installation.
Cooler, drier air: the large volume allows moisture to condense.
🏗️ What it is for
Fixed compressed air installations in industrial units or workshops.
Bodywork and paint workshops with several workstations.
Pneumatic impact and sanding tools.
Carpentry, metalwork and industrial maintenance.
📋 Technical specifications
Voltage: 230 V (CA-PRO200-3MF) or 400 V three-phase (CA-PRO200-3TF)
Power: 3 HP
Maximum pressure: 10 bar
Air delivery: 365 L/min
Speed: 1,375 rpm
Tank capacity: 200 litres
Drive: belt
💡 Pro tip: a 200-litre tank takes a long time to fill from empty, and that is its only drawback. Leave the compressor switched on all day rather than turning it off at every break: maintaining pressure uses very little energy, whereas filling it from empty three times a day means fifteen minutes of the motor at full load each time.
Frequently asked questions
Why would I want a 200-litre tank with only 3 HP?
The large reserve allows long, widely spaced cycles: the motor works less, runs cooler and is at rest for much of the day. It delivers 365 L/min at 10 bar.
Does it take long to fill?
Yes, from empty a 200-litre tank takes longer than a small one. Maintaining pressure uses little energy, so it is best to leave it switched on during the working day.
Single-phase or three-phase?
Two versions: the 230 V CA-PRO200-3MF and the three-phase 400 V CA-PRO200-3TF, with the same performance. The three-phase version requires a 400 V three-phase socket.
What installations does it serve?
It is suitable for a fixed installation in an industrial unit or workshop with several workstations: bodywork and painting, impact tools, sanding, carpentry and industrial maintenance.
What care does the tank need?
The large volume condenses moisture, so drain the water regularly. Install it level and well ventilated, and check the oil and belt according to the manufacturer's manual.
Frequently Asked Questions
Why would I want a 200-litre tank with only 3 HP?
The large reserve allows long, widely spaced cycles: the motor works less, runs cooler and is at rest for much of the day. It delivers 365 L/min at 10 bar.
Does it take long to fill?
Yes, from empty a 200-litre tank takes longer than a small one. Maintaining pressure uses little energy, so it is best to leave it switched on during the working day.
Single-phase or three-phase?
Two versions: the 230 V CA-PRO200-3MF and the three-phase 400 V CA-PRO200-3TF, with the same performance. The three-phase version requires a 400 V three-phase socket.
What installations does it serve?
It is suitable for a fixed installation in an industrial unit or workshop with several workstations: bodywork and painting, impact tools, sanding, carpentry and industrial maintenance.
What care does the tank need?
The large volume condenses moisture, so drain the water regularly. Install it level and well ventilated, and check the oil and belt according to the manufacturer's manual.
Todo excelente. Tras una primera equivocación con el producto elegido, el equipo de atención al cliente se puedo a trabajar para solucionar el problema y darme una solución adecuada.
