Cuts steel, stainless steel, galvanised steel, brass, aluminium and copper quickly and cleanly using compressed air: no gases and no oxy-fuel cutting. This inverter plasma cutter runs on 230 V and cuts 12 mm recommended and up to 20 mm maximum.
Compact, with a robust casing and carrying handle, contact arc ignition and overcurrent protection. Includes PH60 torch, earth clamp and cable.
✅ Key benefits
Cuts almost any metal: steel, stainless steel, galvanised steel, brass, aluminium and copper.
230 V: runs from a single-phase socket.
Up to 20 mm: 12 mm recommended cut.
Compressed air only: no gas cylinders.
Compact and robust: with a handle for moving it around the workshop.
🏗️ What it's for
Locksmithing and metal fabrication.
Sheet metal workshops, scrapyards and repairs.
On-site cutting and maintenance.
Trimming sheet metal and profiles for DIY.
📋 Technical specifications
Type: inverter plasma cutter
Power supply: 230 V, 50/60 Hz
Adjustment range: 10-55 A
Recommended / maximum cut: 12 mm / 20 mm
Duty cycle: 55 A at 60% (40 °C)
Open-circuit voltage: 254 V DC
Input current (Imax/Ieff): 38 / 24 A
Air flow: 195 L/min
Protection: IP21
Includes: PH60 torch, earth clamp and cable
Weight with packaging: 8 kg
💡 Pro tip: plasma needs clean, dry air: fit a filter with drain at the inlet and use a compressor that comfortably delivers 195 L/min. Water in the air is what wears out electrodes and nozzles fastest.
Complete your cutting station
To cut with quality you need clean, dry air: combine the plasma cutter with a compressor of sufficient flow, a filter with drain and a hose with a quick coupler. Add a spare consumables kit and do not forget welding gloves and eye protection.
Frequently asked questions
What do I need to use it?
A 230 V socket and an air compressor with sufficient flow (the machine consumes about 195 L/min).
What thickness does it cut?
12 mm recommended and up to 20 mm maximum.
Which metals does it cut?
Steel, stainless steel, galvanised steel, brass, aluminium and copper.
What is included?
PH60 torch, earth clamp and cable.
Are spare parts available?
Yes, we stock replacement electrodes for this machine.
Frequently Asked Questions
What do I need to use it?
A 230 V socket and an air compressor with sufficient flow (the machine consumes about 195 L/min).
What thickness does it cut?
12 mm recommended and up to 20 mm maximum.
Which metals does it cut?
Steel, stainless steel, galvanised steel, brass, aluminium and copper.
What is included?
PH60 torch, earth clamp and cable.
Are spare parts available?
Yes, we stock replacement electrodes for this machine.
Todo excelente. Tras una primera equivocación con el producto elegido, el equipo de atención al cliente se puedo a trabajar para solucionar el problema y darme una solución adecuada.
