4-way single-phase pressure switch for compressors up to 2 HP

19,60 €
19,60 € 20,00 €
You save 2% (0,40 €)

Delivery in 3–15 days

Tax included. Shipping calculated at checkout.
Model

4-way single-phase pressure switch for compressors up to 2 HP

The pressure switch is the brain of the compressor: it starts and stops the motor according to the tank pressure. If yours doesn't cut out, won't start or leaks air through the valve, this 4-way single-phase pressure switch restores automatic, safe operation to your compressor.

It is a spare part for single-phase compressors up to 2 HP and 8 bar, with a 4-way outlet and an unloader valve that releases the pump so the motor starts without strain. There are two models: compare yours with the photos to choose the one that matches.

A pressure switch in good condition protects the motor and tank: it cuts out at the correct pressure, prevents forced starts and extends the life of the whole unit.

✅ Key benefits

  • Automatic start and stop: controls the motor according to pressure.
  • 4-way: several air connections in a single body.
  • Unloader valve: the motor starts unloaded and without strain.
  • Up to 2 HP and 8 bar: for single-phase workshop and DIY compressors.
  • Two models: choose the one that matches yours.

🏗️ What it's for

  • Replacing a faulty pressure switch.
  • Compressors that won't start or won't cut out.
  • Fixing leaks from the unloader valve.
  • Maintenance of single-phase compressors up to 2 HP.

📋 Technical specifications

  • Voltage: single-phase
  • Power: up to 2 HP
  • Maximum pressure: 8 bar
  • Ways: 4, with unloader valve
  • Models: 871/1 and 871/2

💡 Vetonek tip: disconnect the compressor and drain the tank before replacing it; use PTFE tape on the thread and tighten without straining the pressure switch body. The electrical connection must be made by a qualified person.

Frequently asked questions

Which of the two models do I need?

Compare the shape, position of the ports and thread with your current pressure switch; if in doubt, send us a photo.

Is it suitable for 3 HP compressors?

No, it is designed for single-phase motors up to 2 HP.

What is the maximum pressure?

Up to 8 bar.

What is the unloader valve for?

It releases the air from the pump when it stops so the motor can start again without strain.

Is it suitable for three-phase compressors?

No, it is single-phase; for three-phase units there are 10 bar three-phase pressure switches.

Frequently Asked Questions

Which of the two models do I need?

Compare the shape, position of the ports and thread with your current pressure switch; if in doubt, send us a photo.

Is it suitable for 3 HP compressors?

No, it is designed for single-phase motors up to 2 HP.

What is the maximum pressure?

Up to 8 bar.

What is the unloader valve for?

It releases the air from the pump when it stops so the motor can start again without strain.

Is it suitable for three-phase compressors?

No, it is single-phase; for three-phase units there are 10 bar three-phase pressure switches.