Silent oil-free compressor 24 L - 2 HP and high flow
The logical step up when the 6-litre model falls short. It keeps the low noise level, 72 dB, but delivers 230 L/min, enough air flow to run air tools continuously without the motor starting every few moments.
It is still oil-free: clean air for painting and precision air tools, and no lubricant maintenance.
✅ Key benefits
230 L/min air flow: runs impact wrenches, nail guns and spray guns without falling short.
72 dB: you can work next to it without hearing protection.
24-litre tank: fewer motor starts and a longer service life.
Oil-free: zero maintenance and clean air.
With wheels: move it around the workshop without having to lift it.
🏗️ What it is for
Workshop air tools: impact wrenches, ratchets, drills.
Spray painting and finishing work.
Nailing and stapling in carpentry and assembly.
General inflating and blowing.
📋 Technical specifications
Power: 2 HP
Maximum pressure: 8 bar
Air flow: 230 L/min
Speed: 2,850 rpm
Tank capacity: 24 litres
Sound level: 72 dB
Lubrication: oil-free
💡 Pro tip: look at the air flow, not the horsepower. A 1/2" impact wrench requires around 200-300 L/min in intermittent use: with 230 L/min you are fine for tightening and loosening, but if you are going to sand with air tools you need the 50-litre model, because a sander consumes air continuously.
Frequently asked questions
What jobs is this 24-litre, 2 HP compressor suitable for?
With 230 L/min at 8 bar it runs workshop air tools such as impact wrenches and ratchets, spray guns, nail guns and staplers, as well as inflating and blowing.
How much noise does it make?
Its sound level is 72 dB, with an oil-free 2 HP motor. It is slightly noisier than the 59 to 68 dB models in the range.
Does it need oil?
No, it is an oil-free compressor: there is no lubricant to check and the air comes out clean. Drain the tank when you finish to remove the condensed water.
What is the difference between the 24 litres and the 230 L/min?
The 24 litres are the reserve and the 230 L/min is the air the compressor produces. The air flow determines which tools you can run; the tank reduces motor starts.
Is it suitable for sanding with air tools?
A sander consumes air continuously and can exceed 230 L/min. For that use, a model with higher air flow is advisable, such as the 4 HP models in the range.
Frequently Asked Questions
What jobs is this 24-litre, 2 HP compressor suitable for?
With 230 L/min at 8 bar it runs workshop air tools such as impact wrenches and ratchets, spray guns, nail guns and staplers, as well as inflating and blowing.
How much noise does it make?
Its sound level is 72 dB, with an oil-free 2 HP motor. It is slightly noisier than the 59 to 68 dB models in the range.
Does it need oil?
No, it is an oil-free compressor: there is no lubricant to check and the air comes out clean. Drain the tank when you finish to remove the condensed water.
What is the difference between the 24 litres and the 230 L/min?
The 24 litres are the reserve and the 230 L/min is the air the compressor produces. The air flow determines which tools you can run; the tank reduces motor starts.
Is it suitable for sanding with air tools?
A sander consumes air continuously and can exceed 230 L/min. For that use, a model with higher air flow is advisable, such as the 4 HP models in the range.
Todo excelente. Tras una primera equivocación con el producto elegido, el equipo de atención al cliente se puedo a trabajar para solucionar el problema y darme una solución adecuada.
