Skip to product information
  • Compresor de 50 L y 3 HP con cabezal en V Vica Work - Vetonek
  • Detalle del compresor de 50 L y 3 HP con cabezal en V Vica Work - Vetonek
  • Detalle del compresor de 50 L y 3 HP con cabezal en V Vica Work - Vetonek
  • Compresor de 50 L y 3 HP con cabezal en V Vica Work - Vetonek
  • Detalle del compresor de 50 L y 3 HP con cabezal en V Vica Work - Vetonek
  • Detalle del compresor de 50 L y 3 HP con cabezal en V Vica Work - Vetonek

Semi-professional compressor 50 L - 3 HP, 9 bar and 358 L/min at V

244,02 €
244,02 € 249,00 €
You save 2% (4,98 €)

Delivery in 3–9 days

Tax included. Shipping calculated at checkout.
Packaging

Semi-professional compressor 50 L - 3 HP, 9 bar and 358 L/min at V

It combines the three things you look for in a single-phase workshop compressor: high air flow (358 L/min), pressure with headroom (9 bar) and enough reserve (50 litres). With that, it can supply practically any intermittently used air tool without falling short.

The twin-cylinder V pump is what makes that air flow possible with just 3 HP: two cylinders working alternately, with less vibration and better cooling than a single pump pushed to the limit.

✅ Key benefits

  • 9 bar pressure: one bar of headroom over the standard, which you will appreciate with a long hose.
  • 358 L/min: air flow for demanding tools.
  • V pump: more performance and less vibration.
  • 50-litre reserve to absorb consumption peaks.
  • Single-phase 230 V: no electrical work needed.

🏗️ What it is for

  • Mechanical workshops with impact wrenches and ratchets.
  • Spray painting and bodywork.
  • Carpentry and assembly air tools.
  • Workshops and garages with heavy daily but not continuous use.

📋 Technical specifications

  • Voltage: 230 V
  • Power: 3 HP
  • Maximum pressure: 9 bar
  • Air flow: 358 L/min
  • Speed: 2,850 rpm
  • Tank capacity: 50 litres
  • Pump: twin-cylinder V

💡 Pro tip: with 3 HP single-phase, it is the start-up that suffers. Never restart it immediately after stopping it with the tank under pressure: the unloader valve needs a few seconds to relieve the piston head, and if the motor has to start against pressure, the thermal cut-out ends up tripping or the capacitor burns out.

Frequently asked questions

What are the advantages of the V pump?

Two cylinders working alternately deliver 358 L/min with just 3 HP, with less vibration and better cooling than a single pump pushed to the limit.

How much pressure does it deliver?

Up to 9 bar, one bar more than the standard 8 bar, which you will appreciate with a long hose.

Is it suitable for continuous use in a workshop?

It is designed for heavy daily but not continuous use: it supplies intermittently used air tools. For non-stop air, there are continuous-duty compressors.

Can I restart it straight after stopping it?

It is not advisable with the tank under pressure. Wait a few seconds for the unloader valve to relieve the piston; if it starts against pressure, the thermal cut-out may trip or the capacitor may be damaged.

Does it need a special installation?

No. It is single-phase 230 V, with 3 HP and a 50-litre tank.

Frequently Asked Questions

What are the advantages of the V pump?

Two cylinders working alternately deliver 358 L/min with just 3 HP, with less vibration and better cooling than a single pump pushed to the limit.

How much pressure does it deliver?

Up to 9 bar, one bar more than the standard 8 bar, which you will appreciate with a long hose.

Is it suitable for continuous use in a workshop?

It is designed for heavy daily but not continuous use: it supplies intermittently used air tools. For non-stop air, there are continuous-duty compressors.

Can I restart it straight after stopping it?

It is not advisable with the tank under pressure. Wait a few seconds for the unloader valve to relieve the piston; if it starts against pressure, the thermal cut-out may trip or the capacitor may be damaged.

Does it need a special installation?

No. It is single-phase 230 V, with 3 HP and a 50-litre tank.