Silent oil-free compressor 50 L - 2.8 HP and 300 L/min twin-cylinder

307,72 €
307,72 € 314,00 €
You save 2% (6,28 €)

Delivery in 3–9 days

Tax included. Shipping calculated at checkout.
Packaging

Silent oil-free compressor 50 L - 2.8 HP and 300 L/min twin-cylinder

When a 1.5 HP silent compressor falls short, the answer is not a bigger tank: it is more air flow. This unit has two twin-cylinder pumps working in parallel and delivering 300 L/min, double that of a conventional silent compressor, without exceeding 65 dB.

Sharing the work between two pumps has a direct consequence: each one works half as hard, heats up less and lasts longer. And because it is oil-free, the air comes out clean for painting and precision air tools without additional filters.

✅ Key benefits

  • 300 L/min at 8 bar: air flow for tools with sustained consumption.
  • Two twin-cylinder pumps: less load per pump, lower temperature, longer life.
  • 65 dB: workshop power without workshop noise.
  • Oil-free: clean air at source and zero crankcase maintenance.
  • 50 litres on wheels to move it around the premises.

🏗️ What it is for

  • Spray painting that requires continuous air.
  • Mechanical workshops: impact wrenches, ratchets and blowing.
  • Carpentry with several nail guns at once.
  • Workshops open to the public where noise is a drawback.

📋 Technical specifications

  • Power: 2.8 HP
  • Maximum pressure: 8 bar
  • Air flow: 300 L/min
  • Speed: 1,400 rpm
  • Tank capacity: 50 litres
  • Sound level: 65 dB
  • Configuration: two twin-cylinder pumps
  • Lubrication: oil-free

💡 Pro tip: with two pumps, the electrical draw at start-up is high. Check that your supply can handle it: 2.8 HP on single-phase requires a generously rated RCD and circuit breaker and, above all, no thin extension leads. A 25-metre, 1.5 mm² cable causes voltage drops that trip the motor's thermal protection and end up burning it out.

Frequently asked questions

What do the two twin-cylinder pumps offer?

They share the work between two pumps running in parallel, so each one works less hard and heats up less. They deliver 300 L/min at 8 bar.

How much noise does it make?

It runs at 65 dB, a level designed for workshops open to the public where noise is a drawback.

Does it need oil?

No, it is an oil-free compressor: the air comes out clean for painting and precision air tools, and there is no crankcase maintenance.

What tools can I use?

Spray painting with continuous air, impact wrenches and ratchets, blowing and several nail guns at once in carpentry.

What should I choose if the 1.5 HP model falls short?

The solution is not a bigger tank but more air flow. This model delivers 300 L/min, compared with 150 L/min for the 1.5 HP models, with the same 50-litre tank.

Frequently Asked Questions

What do the two twin-cylinder pumps offer?

They share the work between two pumps running in parallel, so each one works less hard and heats up less. They deliver 300 L/min at 8 bar.

How much noise does it make?

It runs at 65 dB, a level designed for workshops open to the public where noise is a drawback.

Does it need oil?

No, it is an oil-free compressor: the air comes out clean for painting and precision air tools, and there is no crankcase maintenance.

What tools can I use?

Spray painting with continuous air, impact wrenches and ratchets, blowing and several nail guns at once in carpentry.

What should I choose if the 1.5 HP model falls short?

The solution is not a bigger tank but more air flow. This model delivers 300 L/min, compared with 150 L/min for the 1.5 HP models, with the same 50-litre tank.