Skip to product information
  • Compresor de tornillo monofásico 3 HP 90 L Vica Work - Vetonek
  • Compresor de tornillo monofásico 3 HP 90 L Vica Work - Vetonek
  • Compresor de tornillo monofásico 3 HP 90 L Vica Work - Vetonek
  • Compresor de tornillo monofásico 3 HP 90 L Vica Work - Vetonek

3 HP single-phase screw compressor with 90 L air tank - 230 V

3.332,00 €
3.332,00 € 3.400,00 €
You save 2% (68,00 €)

Delivery in 3–15 days

Tax included. Shipping calculated at checkout.
Packaging

3 HP single-phase screw compressor with 90 L air tank - 230 V

The advantages of a screw compressor (continuous operation, low noise and steady air) without the need for a three-phase installation: this model runs on 230 V single-phase, so it plugs in at any workshop.

It delivers 261 L/min at 10 bar on a 90-litre tank, with an IE3 motor, direct drive and a noise level of only 65 dB.

✅ Key benefits

  • 230 V single-phase: you do not need three-phase power to switch to a screw compressor.
  • Continuous use: without the mandatory rest periods of a piston compressor.
  • 90 L tank: reserve for consumption peaks, all in a single unit.
  • 65 dB: quieter than a piston compressor with similar air delivery.
  • IE3 motor: high efficiency and lower electricity consumption.

🏗️ What it is for

  • Small workshops and garages with constant air consumption.
  • Painting, blowing and air tools throughout the working day.
  • Premises without a three-phase supply.

📋 Technical specifications

  • Technology: lubricated screw, fixed speed
  • Power: 3 HP (2.2 kW)
  • Air delivery: 261 L/min
  • Maximum pressure: 10 bar (145 psi)
  • Voltage: 230 V single-phase, 50 Hz
  • Tank: 90 litres
  • Noise level: 65 dB(A)
  • Outlet connection: 1/2"
  • Motor: IE3 efficiency

🔎 Is this the right compressor for you?

If air is used for many hours a day in your workshop and you do not have three-phase power, this unit gives you the best of a screw compressor on 230 V single-phase: a steady air delivery of 261 L/min, only 65 dB and a built-in 90 L tank for consumption peaks, with nothing extra to install.

💡 Pro tip: a 3 HP single-phase motor draws a fair amount of current on start-up: connect it to a dedicated circuit with its own circuit breaker and avoid long or thin extension leads. It will start better and you will protect the motor.

Frequently asked questions

Does it work from a standard 230 V socket?

Yes, it is a 230 V single-phase unit. We recommend a dedicated circuit with its own protection, given the motor's power.

What air delivery does it provide?

261 L/min at 10 bar, enough for painting, blowing and medium-consumption air tools in continuous use.

Does it have a tank?

Yes, it is mounted on a 90-litre tank.

Is it quiet?

It works at around 65 dB(A), considerably less than an equivalent piston compressor.

Does it have a dryer?

No. If you need dry air for painting, add a separator filter or a dryer at the outlet.

Frequently Asked Questions

Does it work from a standard 230 V socket?

Yes, it is a 230 V single-phase unit. We recommend a dedicated circuit with its own protection, given the motor's power.

What air delivery does it provide?

261 L/min at 10 bar, enough for painting, blowing and medium-consumption air tools in continuous use.

Does it have a tank?

Yes, it is mounted on a 90-litre tank.

Is it quiet?

It works at around 65 dB(A), considerably less than an equivalent piston compressor.

Does it have a dryer?

No. If you need dry air for painting, add a separator filter or a dryer at the outlet.