Skip to product information
  • Soldador multiproceso 3 en 1 120 A Vica Work - Vetonek
  • Soldador multiproceso 3 en 1 120 A Vica Work - Vetonek

120 A 3-in-1 multi-process welder: gasless flux-cored, stick and TIG

116,62 €
116,62 € 119,00 €
You save 2% (2,38 €)

Delivery in 3–15 days

Tax included. Shipping calculated at checkout.
Packaging

120 A 3-in-1 multi-process welder: gasless flux-cored, stick and TIG

Three ways to weld in one small, lightweight machine: gasless flux-cored wire, stick (MMA) and contact-start TIG (Lift). Designed for maintenance, small repairs and semi-professional projects, in the workshop or on light-duty sites.

The front digital display shows the amperage and wire speed, so it is easy to set up even if you are just starting out. It has external 10-25 connectors to swap cables and clamps depending on the process.

✅ Key benefits

  • 3 processes: gasless wire, stick and TIG Lift in a single machine.
  • No gas cylinder: with self-shielded flux-cored wire you can weld outdoors too.
  • Digital display: amperage and wire speed in plain view.
  • Very light: just over 4 kg with packaging.
  • 10-25 connectors: quick cable change for each process.

🏗️ What it is for

  • DIY and repairs around the house, farm or garage.
  • Maintenance of doors, gates, trailers and farm implements.
  • Welding outdoors without shielding gas.
  • A first machine for learning wire welding.

📋 Technical specifications

  • Processes: gasless wire (flux-cored), MMA and DC TIG Lift
  • Current: 20-120 A in all three processes
  • Duty cycle: 120 A at 40 % (40 ºC)
  • Power supply: 230 V, 50-60 Hz
  • Spool: up to 1 kg, Ø 100 mm
  • Flux-cored wire: 0.8-0.9 mm
  • Electrodes: 1.6-2.5 mm
  • TIG tungsten: 1.2 mm
  • Connectors: 10-25
  • Protection: IP21S
  • Weight with packaging: 4.1 kg
  • Package dimensions: 28.5 x 16.5 x 20 cm

💡 Pro tip: with gasless wire the polarity is usually reversed compared with gas-shielded MIG (torch to negative): check the manual before you start. And clean off the slag between passes with the brush, just as you would with stick welding.

Complete your kit

To start welding you only need a spool of 0.8-0.9 mm gasless flux-cored wire, a box of 1.6 to 2.5 mm electrodes and good protection: an auto-darkening welding helmet, split leather gloves and a chipping hammer to remove the slag. If you are going to use TIG Lift mode, add an argon cylinder with its regulator.

Frequently asked questions

Does it need a gas cylinder?

Not for welding with flux-cored wire, which is self-shielded. For TIG Lift you will need argon.

Which spools does it take?

Spools up to 1 kg and 100 mm in diameter, with 0.8 to 0.9 mm flux-cored wire.

Which electrodes can I use?

From 1.6 to 2.5 mm.

Does it work on a normal socket?

Yes, on 230 V single-phase.

Is it easy to carry?

Yes, it is a very light machine: it weighs 4.1 kg with packaging, and the package measures 28.5 x 16.5 x 20 cm.

Frequently Asked Questions

Does it need a gas cylinder?

Not for welding with flux-cored wire, which is self-shielded. For TIG Lift you will need argon.

Which spools does it take?

Spools up to 1 kg and 100 mm in diameter, with 0.8 to 0.9 mm flux-cored wire.

Which electrodes can I use?

From 1.6 to 2.5 mm.

Does it work on a normal socket?

Yes, on 230 V single-phase.

Is it easy to carry?

Yes, it is a very light machine: it weighs 4.1 kg with packaging, and the package measures 28.5 x 16.5 x 20 cm.