160 A MIG, stick and TIG multi-process welder for 5 kg spools
A 3-in-1 workshop machine that does almost everything: gas-shielded MIG, gasless flux-cored wire, stick and TIG Lift. It runs on 230 V and takes spools up to 5 kg (Ø 200 mm), so you change wire far less often.
The digital display shows amps and volts for precise adjustment. It takes steel (0.6-1.0 mm), aluminium, copper-silicon and flux-cored wire (0.8-1.0 mm) and electrodes from 1.6 to 3.25 mm.
✅ Key benefits
4 ways to weld: gas-shielded MIG, gasless wire, stick and TIG Lift.
5 kg spool: longer run time on long jobs.
Digital A/V display: precise setting of amperage and voltage.
Several wire types: steel, aluminium, CuSi3 and flux-cored.
Portable and robust: for constant use in the workshop or away from it.
🏗️ What it is for
Mechanical and body repair shops.
Metalwork and metal fabrication.
Aluminium welding and MIG brazing of galvanised sheet with CuSi3.
Industrial and agricultural maintenance.
📋 Technical specifications
Processes: MIG/MAG, gasless wire, MMA and DC TIG Lift
Current: 20-160 A
Duty cycle: 160 A at 30 % (40 ºC)
Open-circuit voltage: 56 V
Power supply: 230 V, 50-60 Hz
Spool: up to 5 kg, Ø 200 mm
Steel wire: 0.6-1.0 mm
Aluminium wire: 0.8-1.0 mm
CuSi3 wire: 0.8-1.0 mm
Flux-cored wire: 0.8-1.0 mm
Electrodes: 1.6-3.25 mm
Protection: IP21S
Weight with packaging: 6.5 kg
💡 Pro tip: for aluminium, switch to a Teflon liner and U-groove rolls, and use pure argon: with a steel liner aluminium wire jams. And check the nozzle and contact tip regularly: most wire feed problems start there.
Complete your kit
For gas-shielded MIG you will need a cylinder of welding gas with its regulator and a spool of wire in the material you are going to weld; for aluminium, aluminium wire with a Teflon liner. Add an auto-darkening welding helmet, welding gloves and an anti-spatter spray to keep the nozzle and contact tip clean.
Frequently asked questions
Can I weld without gas?
Yes, with self-shielded flux-cored wire. With solid wire you will need shielding gas.
Which spools does it take?
Up to 5 kg and 200 mm in diameter, as well as smaller ones.
Does it weld aluminium?
Yes, with 0.8-1.0 mm aluminium wire and pure argon.
Does it run on 230 V?
Yes, it is single-phase.
Can I weld with stick electrodes?
Yes, with electrodes from 1.6 to 3.25 mm.
Frequently Asked Questions
Can I weld without gas?
Yes, with self-shielded flux-cored wire. With solid wire you will need shielding gas.
Which spools does it take?
Up to 5 kg and 200 mm in diameter, as well as smaller ones.
Does it weld aluminium?
Yes, with 0.8-1.0 mm aluminium wire and pure argon.
Todo excelente. Tras una primera equivocación con el producto elegido, el equipo de atención al cliente se puedo a trabajar para solucionar el problema y darme una solución adecuada.
