Duero Wall Coping 75 cm - Mid-Size Format with Anti-Stain Drip Edge
Duero Wall Coping 75 cm: the mid-size flat slab
Between the half-metre piece, which multiplies the joints, and the 1-metre piece, which already needs two people, sits this 75 cm format. It keeps the built-in drip edge that keeps water off the façade and a completely flat surface for fitting trellis, balusters or planters, in high-performance concrete with no internal reinforcement.
✅ Key advantages
Built-in drip edge: keeps water off the façade and prevents streaks, stains and damp.
75 cm format: a third fewer joints than the 50 cm piece, without losing manageability.
Flat surface: a secure base for trellis, balusters and planters.
No internal reinforcement: zero risk of rust stains over the years.
3 colours: Grey, White and Black.
🏗️ Recommended applications
Capping for home enclosure walls.
Garden walls and built-in planters.
Terrace parapets.
Support base for trellis and metal panels.
📋 Technical data sheet
Material: high-performance concrete with selected natural aggregates.
Profile: flat slab with drip edge.
Size: 75 × 28 × 4 cm.
Pieces per linear metre: 1.33.
Colours: Grey, White and Black.
Reinforcement: none.
🧰 Installation
Clean and level the top of the wall.
Dry-lay the course first: with a 75 cm module it rarely comes out to an exact fit, so decide the cut beforehand.
Spread flexible bonding mortar with a continuous bead along both edges.
Bed the piece with symmetric overhang and level with a rubber mallet.
Leave a 3-5 mm joint and point it with elastic mortar.
Clean while fresh and protect from rain for 24 hours.
📦 Available formats
Single unit.
Full pallet.
💡 Professional tip: with a 75 cm module you almost never get an exact division, so plan the cut before you start and place it at the least visible end, not in the middle of the main façade. And allow for 8% extra material: between the adjustment cut and the odd chipped edge on delivery, the usual 5% falls short with long pieces.
