How much stone do I need?
How much stone do I need for the ground?
For pebble and gravel:
• approximately 80kg per m², based on a 5cm layer.*For particle sizes >32mm, a thicker layer is required.
• Consumption per sack: 1000kg = 0.625m³.
• Coverage: approximately 12.5m² with a 5 cm layer.
For pine bark:
• approximately 70L per m², based on a 5cm layer.
• Consumption per sack: 1000L = approximately 1m³ = approximately 600kg
• Coverage: approximately 14m² with a 5 cm layer.
For volcanic, slate and chamotte:
• approximately 50kg per m², based on a 5cm layer.
• Consumption per sack: 1000kg = approximately 1m³
• Coverage: approximately 20m² with a 5 cm layer
How much stone do I need to fill a gabion?
Density of approximately 1,650kg per 1m³.
The calculation is very easy to understand with an example: if you have a gabion of 100x50x30 cm, you must do the following calculations:
1x0.5x0.3 = 0.15m³
0.15x1,650 = 247.50kg of stone.
*It is always a good idea to calculate an extra 5%, since when gabions are filled they expand a little and a little more stone always fits than in the theoretical calculations.
Clarifications
ATTENTION!
The grain sizes of GRAVELS AND pebbles are sieve sizes
The actual sizes may vary slightly, since when talking about, for example, 60-80mm stone, it means that the stones pass through an 80x80mm square mesh and do not pass through a 60x60mm one.
Through that 80x80 mesh, a stone 100mm long and 65mm wide can pass, so there may be a percentage of stones larger than 80 and smaller than 60mm.
Breakage of pebbles
On the other hand, in pebbles larger than 60mm, there is a percentage of up to 10% of stones that can break during sorting, washing, loading and unloading; to this day we do not have machinery that prevents such breakages.
In the photos you can see, only real products are shown; broken pieces have not been removed.
Dust and sand in the products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; the stone will wash itself over time or you can pour water on it before using it.
Absorbent for Dolomita gas stains
The absorbent dolomite is an effective and sustainable solution designed for the control of gasoline, oil, diesel and other petroleum derivatives in gas stations and similar areas. With fine 0.5 mm farulometry, it facilitates effective liquid absorption, promoting a clean and safe work environment.
Key features:
- Granulometry: 0.5 mm.
- Presentations: 15 -liter bags, Big Bags of 500 and 1,000 liters.
- Origin: Local mineral product.
- Ecology: 100% natural, ecological and sustainable.
- Durability: Indefinite under adequate storage conditions.
Advantages:
- Economic: More cost-efficient than traditional absorbent.
- Ecological: It reduces the carbon footprint and does not affect the environment.
- Versatility: Effective in the absorption of various liquids and applicable in multiple areas of the gas station.
- Convenience: Different packaging sizes and without expiration.
- Security: Minimizes risks of slippers and falls, maintaining security in the work environment.
Applications:
- Spill absorption: Rapid absorption of fuel and other liquids.
- General cleaning: For routine maintenance and cleaning.
- Environmental protection: It helps prevent soil and groundwater pollution.
Mode of use:
- Sprinkle on the spill to cover it completely.
- Leave a few minutes.
- Sweep or collect the material and discard according to local regulations.
Storage:
- Store in a dry and fresh place, and keep the packaging closed to avoid moisture.
Conclusion: The absorbent dolomite is a rapid, effective and ecological solution for the management of spills in gas stations, ensuring efficient and safe maintenance of these dynamic areas. It is a key ally to maintain clean and functional facilities, optimizing safety and operability without compromising service quality.