Augusta Paver: the 16 cm wide modular range for combining sizes
The Augusta Paver by Adybor is a modular range built on a common width of 16 cm and a thickness of 7 cm. With the three main sizes — 24x16, 16x16 and 12x16 — combined layouts can be assembled without cutting a single piece, because they all finish in the same course. Unlike the Forum, each format is supplied palletized separately, so you decide the proportion of the mix.
✅ Advantages
Common 16 cm module: the three 7 cm sizes fit together in the same course, with no adjustments or cuts.
You choose the mix: each format arrives on its own pallet, so you can define the proportion of the layout.
7 cm thickness: above the 6 cm pedestrian paver, suitable for areas with vehicle traffic.
Wide color palette: ash, gray, black, sahara and vulcano.
Wear: class 4 I, Xi<20 mm. Absorption: class 2B, X8<6 %.
Intended use: pedestrian use, areas subject to vehicle traffic and roofs.
🧠 Installation
Excavate the bed and compact the natural ground, leaving the drainage slope in place.
Spread and compact a 15-20 cm base of crushed stone for pedestrian use, or 25-30 cm if there will be vehicular traffic.
Lay a 3-5 cm bedding sand layer, level it with a screed and do not compact it.
If you are combining formats, decide the proportion beforehand and work with the three pallets open at the same time, alternating sizes course by course.
Contain the perimeter with curb edging or concrete edging so the pavement does not open up.
Sweep silica sand into the joints, run the vibrating plate with a rubber mat, and repeat the sweeping after a few days.
📦 Formats and colors
Available in store: 24x16x7 cm (gray and color), 16x16x7 cm (gray and color), 12x16x7 cm (gray and color) and 24x16x5 cm (color only).
Also made on request, with no list price available today: 21x17x7, 8x8x7, 20x10x8, 30x20x11 and 20x20x8 cm. Check availability and price before designing with them.
Factory-available colors: ash, gray, black, sahara, and vulcano. Ash, black, sahara, and vulcano are priced under the Color category, which is how the manufacturer invoices them.
💡 Professional tip: if you are going to combine 24x16, 16x16, and 12x16, lock in the proportion before ordering (for example 50-30-20) and calculate the square meters of each format separately, because here each size travels on its own pallet and being short on just one forces the work to stop. Add an extra 5-7% for cuts and finishing pieces, and buy everything at once: in shades like sahara or vulcano, a pallet delivered months later almost never matches. Also be careful with the 24x16x5: its 5 cm are for pedestrian use, do not use it for a car entrance; for that, the 7 cm sizes are intended.
