Weld at high current for hours without the torch overheating. When welding at high current over long shifts, an air-cooled torch gets too hot. This water-cooled wire torch handles up to 500 A and keeps the neck and consumables at working temperature.
It is 3 metres long and is the replacement torch for the PROMIG500DP multi-process welder: fit it and get back to production without changing your machine or the way you work.
Benefits
Up to 500 A: for industrial welding of thick sections.
Water cooling: lower temperature at the neck and consumables, longer service life.
3 m long: comfortable reach around the workpiece.
Direct replacement: compatible with the PROMIG500DP welder.
What it is for
Replacing the torch on the PROMIG500DP welder.
Industrial MIG/MAG welding at high current.
Heavy boilermaking, structural steelwork and series production.
Technical specifications
Type: MIG/MAG wire torch
Maximum current: 500 A
Cooling: water
Length: 3 m
Compatibility: PROMIG500DP
Model: CE-MT501
Supplied as: bag
Vetonek tip
Never weld with the water-cooled torch unless the water circuit is running: within a few minutes at high current the neck and liner will be damaged. Check the level and condition of the coolant from time to time, and make sure the hoses are not kinked or pinched.
Frequently asked questions
Which welder is it compatible with?
It is the replacement torch for the PROMIG500DP multi-process welder.
Does it need a cooler?
Yes. It is a water-cooled torch and must always be used with the machine's cooling circuit running.
How long is it?
3 metres, enough to move comfortably around the workpiece without moving the welder.
What current can it handle?
Up to 500 A, for industrial MIG/MAG welding of thick sections and long beads.
What is the advantage over an air-cooled torch?
It dissipates heat much better, so the neck and consumables last longer and you can weld at high current for longer without a break.
Frequently Asked Questions
Which welder is it compatible with?
It is the replacement torch for the PROMIG500DP multi-process welder.
Does it need a cooler?
Yes. It is a water-cooled torch and must always be used with the machine's cooling circuit running.
How long is it?
3 metres, enough to move comfortably around the workpiece without moving the welder.
What current can it handle?
Up to 500 A, for industrial MIG/MAG welding of thick sections and long beads.
What is the advantage over an air-cooled torch?
It dissipates heat much better, so the neck and consumables last longer and you can weld at high current for longer without a break.
Todo excelente. Tras una primera equivocación con el producto elegido, el equipo de atención al cliente se puedo a trabajar para solucionar el problema y darme una solución adecuada.
