Silica sand for grass and sand
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.
Silica sand for grass and sand
Silica sand in ideal size for the grass, produces a greater sensation of natural grass when stepping, avoids hair crushing and holds it more upright and keeps the grass much fresher especially in summer, much more if it laughs a little in the morning, since the silica sand will release the humidity little by little and this makes the grass not hot.
How to place the silica sand
1. You must spread Silica sand after installing the grass.
2. You can transport the sand on a wheelbarrow and spread with the help of a shovel or with your own hands, which is more comfortable.
3. You have to spread between 3 and 4 kg by m² all over the surface so that the grass adheres well.
4. With a hard bristle brush o An electric comb all the lawn in the opposite direction to the fibers so that the sand is lowering to the bottom.
5. Finally, water The lawn with a little water and lets it settle.
Song Size for lawn and sand
The perfect measure to extend on the grass, both natural and in the artificial is 0.3-0.6 mm, it is also to fill in a sandbox. We send it home in 25 kg bags. or large big bag of 1,000 kg.