Drive screws in series, quickly and without tiring your wrist. This straight compressed-air screwdriver from Aeropro is lightweight and high-speed, with a quick, simple bit change so you can move from one screw to the next without wasting time.
It is widely used in aluminium joinery (windows and doors), furniture assembly and vehicle repair and maintenance, where the same screwing operation is repeated dozens of times a day. With 11,000 rpm and an air consumption of 74 l/min, it runs on a 2 HP compressor.
Its straight, compact format lets you work in line with the screw and reach narrow areas, and being pneumatic it does not overheat or depend on batteries: as long as there is air, it keeps working.
For assembly workshops and aluminium joinery shops, it is a tool that soon pays for itself.
Key benefits
11,000 rpm: fast screwdriving for series work
Light and straight: comfortable and precise all day
Quick bit change: move from one screw to another in seconds
74 l/min consumption: runs on a 2 HP compressor
Pneumatic: no batteries, no overheating
What it's for
Aluminium joinery: windows and doors.
Furniture assembly.
Vehicle repair and maintenance.
Workshop assembly lines.
Series assembly of parts.
Technical specifications
Brand: Aeropro
Speed: 11,000 rpm
Air consumption: 74 l/min
Air inlet: 1/4"
Recommended compressor: 2 HP
Packaging: 19 x 7.5 x 5 cm
Reference: RP7225
Vetonek tip: put a few drops of pneumatic tool oil in the air inlet every day you use it and work with dry air: a filter regulator with lubricator greatly extends the life of any pneumatic tool. Adjust the pressure so as not to strip the screws.
Frequently asked questions
What compressor do I need?
A 2 HP compressor is recommended; the screwdriver consumes 74 l/min.
What air inlet does it have?
A 1/4" air inlet.
What jobs is it ideal for?
For aluminium joinery, furniture assembly and vehicle repair and maintenance.
What speed does it run at?
11,000 rpm.
How do I maintain it?
With a few drops of pneumatic tool oil in the air inlet every day you use it, and by working with dry, filtered air.
Frequently Asked Questions
What compressor do I need?
A 2 HP compressor is recommended; the screwdriver consumes 74 l/min.
What air inlet does it have?
A 1/4" air inlet.
What jobs is it ideal for?
For aluminium joinery, furniture assembly and vehicle repair and maintenance.
What speed does it run at?
11,000 rpm.
How do I maintain it?
With a few drops of pneumatic tool oil in the air inlet every day you use it, and by working with dry, filtered air.
Todo excelente. Tras una primera equivocación con el producto elegido, el equipo de atención al cliente se puedo a trabajar para solucionar el problema y darme una solución adecuada.
