Peñalara Baluster 60 cm - Mid Height for Fences, Railings and Dividers
Peñalara 60 cm Baluster: What It Is
This is the 13 × 13 × 60 cm baluster from the Peñalara collection, the height that best suits garden fences and dividers where 50 cm falls short and 75 cm feels too enclosed. It is made using a high-compaction technique and with no internal reinforcement, which avoids the classic problem of reinforced balustrades: the steel rusts, swells and splits the piece from the inside.
✅ Main advantages
No internal reinforcement: there is no steel to rust, so no cracks or rust streaks appear over the years.
High compaction: a closed finish and dense body, with lower water absorption.
Between 11 and 12.5 kg per piece: a manageable weight for assembling long runs by hand.
Two shaft designs: same size, two different turned profiles so you can choose the look of the run.
Compatible with the collection: same cap, wedge and dowel as the other heights.
🏗️ Recommended applications
Plot fences and railings.
Decorative dividers in gardens.
Decorative elements along paths and patios.
Terrace and porch parapets.
📋 Technical data
Dimensions: 13 × 13 × 60 cm.
Weight per unit: 12.22 kg for design 1 and 11.33 kg for design 2.
Available designs: two shaft profiles, with identical dimensions.
Units per pallet: 64, for both designs.
Anchoring: galvanized dowel, 40 × Ø 0.6 cm.
Use: indoor and outdoor.
🧰 Installation
Level and clean the top of the wall or the supporting ring beam.
Set out the center-to-center spacing from one end of the run to the other before drilling.
Place the galvanized dowel at each marked point.
Seat the baluster on a bed of bonding mortar, threading it onto the dowel.
Plumb each piece and check the alignment of the run with a string line.
Fit the top cap and point the joints once the assembly has settled.
📦 Available formats
13 × 13 × 60 cm, design 1: per unit or pallet of 64 units.
13 × 13 × 60 cm, design 2: per unit or pallet of 64 units.
💡 Pro tip: order the whole run in the same design and from the same batch. The two turned profiles are the same size and fit the same cap, but mixing them in a continuous run is noticeable from ten meters away. And if the job is done in two phases, keep half a dozen pieces from the first delivery: they will save you from a difference in tone in the final finish.
Frequently asked questions
What are the dimensions and weight of the Peñalara 60 cm baluster?
It measures 13 x 13 x 60 cm. It weighs 12.22 kg for design 1 and 11.33 kg for design 2, a manageable weight for assembling long runs by hand.
What is the difference between the two designs?
Both designs are the same size and fit the same cap; only the turned profile of the shaft changes. We recommend ordering the whole run in the same design so they are not mixed in a continuous run.
What is it used for?
It works for plot fences and railings, garden dividers, decorative elements along paths and patios, and terrace and porch parapets. It is suitable for indoor and outdoor use.
What is it made of?
It is made of high-compaction precast concrete, with no internal reinforcement, in white. Since it contains no steel, it does not rust or split the piece from the inside.
How many units are in a pallet?
A full pallet has 64 units, for both designs. It is also sold per unit.
Frequently Asked Questions
¿En qué se diferencian el diseño 1 y el diseño 2?
En el torneado del fuste y en el peso: 12,22 kg el diseño 1 y 11,33 kg el diseño 2. Medidas, palet y remate son idénticos.
¿Se pueden mezclar los dos diseños?
Encajan con el mismo remate, pero en un paño continuo la mezcla se nota; conviene un solo diseño por tramo.
¿Cuánto pesa cada pieza?
Entre 11,33 y 12,22 kg según el diseño.
¿Cuántas unidades trae el palet?
64.
¿Lleva armadura interior?
No, se fabrica sin armadura por alta compactación.
¿Qué clavija necesita?
La galvanizada de 40 × Ø 0,6 cm.
¿Sirve para escalera?
Sí, intercalando la cuña de compensación de 13 × 13 cm.
