High-performance compressor pump for belt-driven units
When the pump of a belt-driven compressor loses performance, the unit takes longer and longer to fill and can't keep up. Before replacing the whole compressor, replace just its heart: these K17, K30 and K50 high-performance pumps restore your compressor's working air flow for a fraction of the cost.
Choose the model to suit the power of your unit: 3 HP K17 high-performance, K30 for 7.5 HP compressors and K30 models, or K50 for 10 HP compressors. They are lubricated compressor pumps for belt-driven compressors.
A spare part designed for workshops and industries that depend on compressed air and cannot afford to have the compressor out of action.
✅ Key benefits
Restores air flow: your compressor performs like new again.
Savings compared with a new unit: you only replace the compressor pump.
Three models: K17 (3 HP), K30 (7.5 HP) and K50 (10 HP).
High performance: designed for heavy-duty use in workshops and industry.
For belt-driven compressors: you keep the motor, tank and the rest of the unit.
🏗️ What it's for
Replacing a damaged or worn pump.
Restoring air flow on belt-driven compressors.
Maintenance of workshop and industrial compressors.
Repair after seizure or breakage of the pump.
📋 Technical specifications
Type: replacement compressor pump / unit
K17: 3 HP, high performance
K30: for 7.5 HP compressors and K30 models
K50: for 10 HP compressors
Drive: belt
Lubrication: oil
💡 Vetonek tip: before ordering, check the pump model fitted to your compressor (usually on the rating plate or stamped on the pump) and the pulley: that way you fit the exact replacement. Take the opportunity to replace the belt and the intake filter.
Frequently asked questions
How do I know which pump I need?
Look at the model stamped on the current pump or on your compressor's rating plate and choose the same one: K17, K30 or K50.
Is it supplied with oil?
Always check the level and fill with compressor oil before first start-up.
Is it a spare part for belt-driven compressors?
Yes, they are pumps for 3, 7.5 and 10 HP belt-driven compressors.
What should I check when replacing it?
The belt, pulley alignment, intake filter and safety valve.
Can I fit it myself?
If you have mechanical experience, yes; disconnect the compressor and drain the tank before starting. If in doubt, go to a service centre.
Frequently Asked Questions
How do I know which pump I need?
Look at the model stamped on the current pump or on your compressor's rating plate and choose the same one: K17, K30 or K50.
Is it supplied with oil?
Always check the level and fill with compressor oil before first start-up.
Is it a spare part for belt-driven compressors?
Yes, they are pumps for 3, 7.5 and 10 HP belt-driven compressors.
What should I check when replacing it?
The belt, pulley alignment, intake filter and safety valve.
Can I fit it myself?
If you have mechanical experience, yes; disconnect the compressor and drain the tank before starting. If in doubt, go to a service centre.
Todo excelente. Tras una primera equivocación con el producto elegido, el equipo de atención al cliente se puedo a trabajar para solucionar el problema y darme una solución adecuada.
