Skip to product information
  • Cable de soldadura 10 m Vica Work - Vetonek
  • Cable de soldadura 10 m Vica Work - Vetonek

Heavy-duty welding cable, 10 m roll

43,12 €
43,12 € 44,00 €
You save 2% (0,88 €)

Delivery in 3–15 days

Tax included. Shipping calculated at checkout.
Size

Heavy-duty welding cable, 10 m roll

Renew or extend your welding cables and reach further without losing current. Earth and electrode holder cables get trodden on, burnt and cut. With this heavy-duty welding cable on a 10-metre roll you can renew them or make them longer to work far from the machine.

Available in 1 x 16 mm and 1 x 25 mm, with good conductivity for welding currents and heat resistance. A single roll lets you make up both cables for an MMA machine or one long cable for site work.

Benefits

  • 10 m roll: enough to make up both cables or one long one.
  • Heavy-duty: built for the rough treatment of the workshop and the site.
  • Two cross-sections: 16 mm for light machines, 25 mm for higher current.
  • Combine it: with our connectors, earth clamps and electrode holders.

What it is for

  • Renewing damaged welding cables.
  • Extending the earth or electrode holder cable.
  • Making up custom cable sets for MMA welders.

Technical specifications

  • Type: heavy-duty welding cable
  • Sizes: 1 x 16 mm or 1 x 25 mm
  • Length: 10 m
  • Supplied as: shrink-wrapped roll
  • Packed weight (25 mm): 2.6 kg

Vetonek tip

The longer the cable, the larger the cross-section you need: for long runs or high amperage, choose the 25 mm cable so it does not heat up or lose voltage. Crimp or tighten the terminals properly and check the insulation regularly.

Frequently asked questions

Which cross-section should I choose?

For compact machines and short cables, 16 mm is usually enough; if you weld at higher current or with long cables, 25 mm is better.

How much cable does it come with?

A 10-metre roll, which you can cut to the length you need.

Are connectors included?

No, you can add male/female connectors, an earth clamp and an electrode holder separately.

Is the size the cross-section or the diameter?

The manufacturer calls it 1 x 16 mm and 1 x 25 mm; contact us if you need the exact figure for your terminals.

Is it suitable for any welder?

It is suitable for making up earth and electrode holder cables for stick welders; choose the connector that matches your machine's sockets.

Frequently Asked Questions

Which cross-section should I choose?

For compact machines and short cables, 16 mm is usually enough; if you weld at higher current or with long cables, 25 mm is better.

How much cable does it come with?

A 10-metre roll, which you can cut to the length you need.

Are connectors included?

No, you can add male/female connectors, an earth clamp and an electrode holder separately.

Is the size the cross-section or the diameter?

The manufacturer calls it 1 x 16 mm and 1 x 25 mm; contact us if you need the exact figure for your terminals.

Is it suitable for any welder?

It is suitable for making up earth and electrode holder cables for stick welders; choose the connector that matches your machine's sockets.