Vertical compressed air receiver 11 bar with pressure gauge and valve
The lungs of your air installation: more reserve, fewer starts and a compressor that lasts longer. The air receiver stores air, absorbs demand peaks and reduces compressor starts. These vertical receivers of 270, 500, 720 and 900 litres take up little floor space and are designed for workshops and industry.
They have an epoxy powder coat finish applied at 200 °C, resistant to corrosion and wear, and come equipped with a safety valve, pressure gauge, air outlet valve and drain valve; they also accept an automatic condensate drain (optional).
Advantages
More air reserve: covers demand peaks and the compressor starts less often.
Vertical format: large capacity in a small footprint.
Epoxy paint applied at 200 °C: long-lasting protection against corrosion.
Accepts an automatic drain: so you can forget about draining by hand (optional).
What it is for
Increasing the capacity of a screw or piston compressor.
Creating a buffer close to the points of highest consumption.
Compressed air installations in workshops and industrial units.
Reducing how often the compressor starts and extending its life.
Technical specifications
Capacities: 270 · 500 · 720 · 900 litres
Maximum pressure: 11 bar (recommended working pressure up to 10 bar)
Outlet connection: 3/4" BSP (270, 500 and 720 L)
Dimensions: 270 L: 158 x 53 x 53 cm · 500 L: Ø 660 x 2,160 mm · 720 L: 210 x 80 x 80 cm
Equipment: safety valve, pressure gauge, air outlet valve and drain valve
Optional: automatic condensate drain valve
Finish: epoxy powder coating applied at 200 °C
Packed weight: 90 · 125 · 202 · 190 kg
Vetonek tip
As a rule of thumb, the receiver should hold at least one third of the compressor's flow rate in litres per minute (a 1,500 L/min compressor needs 500 L or more). Drain it daily or fit an automatic drain, and check the safety valve at least once a year.
Frequently asked questions
What receiver capacity do I need?
As a guide, a volume in litres equal to one third of the compressor's flow rate in L/min or more. If there are heavy demand peaks, it is worth going up a size.
What pressure does it work at?
It is rated at 11 bar; a working pressure of no more than 10 bar is recommended.
What is included?
Safety valve, pressure gauge, air outlet valve and drain valve. The automatic drain is optional.
How often should it be drained?
Ideally every day, or fit an automatic drain that expels the water without any intervention.
What maintenance does it need?
Drain the condensate, check the safety valve and the pressure gauge, and touch up the epoxy paint if it deteriorates.
Frequently Asked Questions
What receiver capacity do I need?
As a guide, a volume in litres equal to one third of the compressor's flow rate in L/min or more. If there are heavy demand peaks, it is worth going up a size.
What pressure does it work at?
It is rated at 11 bar; a working pressure of no more than 10 bar is recommended.
What is included?
Safety valve, pressure gauge, air outlet valve and drain valve. The automatic drain is optional.
How often should it be drained?
Ideally every day, or fit an automatic drain that expels the water without any intervention.
What maintenance does it need?
Drain the condensate, check the safety valve and the pressure gauge, and touch up the epoxy paint if it deteriorates.
Todo excelente. Tras una primera equivocación con el producto elegido, el equipo de atención al cliente se puedo a trabajar para solucionar el problema y darme una solución adecuada.
