Velilla 606003 flame-retardant antistatic jacket: the top half of the two-piece set
Jacket in treated cotton twill of 270 g/m² with antistatic fibre, certified to EN ISO 11612 (A1 B1 C1 F1), EN ISO 11611 class 1 A1 and EN 1149. It pairs with the 603003 trousers to make a two-piece outfit with the same protection as the 602003 coverall, while letting you take the top off during breaks.
✅ Features
Protection against heat and flame: EN ISO 11612 with performance levels A1 (limited flame spread), B1 (convective heat), C1 (radiant heat) and F1 (molten metal splash by contact).
Suitable for welding: EN ISO 11611 class 1 A1, the level intended for welding techniques that generate few spatters.
Antistatic: EN 1149, with 3% antistatic fibre woven into the fabric.
Concealed zip with hook-and-loop flap: the metal of the zip stays covered and does not take direct spatter.
Collar with tab and elasticated cuffs, to close off spark entry points at the neck and wrists.
Elastic at the sides of the waist and two patch chest pockets with hook-and-loop flaps.
👷 Suitable for
Welding and allied work within the scope of EN ISO 11611 class 1.
Chemical and petrochemical industry with antistatic requirements.
Foundry work and handling of hot metal, within level F1.
Industrial maintenance in areas with flame risk.
Construction and industrial assembly involving hot work.
Closure: concealed centre zip with hook-and-loop flap.
Collar: with tab.
Cuffs: elasticated. Waist: elastic at the sides.
Pockets: 2 patch chest pockets with hook-and-loop flaps.
Colour: navy blue.
Sizes: S, M, L, XL, 2XL and 3XL.
🧺 Care
Always follow the label: on a category III PPE garment, the washing cycle is part of the certification. Washing outside the instructions can invalidate the protection.
No fabric softener: it leaves a film on the fibre that impairs both antistatic and flame-retardant performance.
No bleach or chlorine-based stain removers: they attack the cotton treatment.
Inspect before each use: a tear, a burn or an open seam puts the garment out of service.
💡 Tip: two-piece or coverall is a risk decision, not a comfort one. The 606003 jacket with the 603003 trousers leaves a join at the waist where a spark can get in when working overhead; for that, the one-piece 602003 coverall is safer. The two-piece set wins when you go in and out of the hot zone several times a day. And in both cases: no certification against electric arc (IEC 61482).
Frequently Asked Questions
Which standards does it meet?
EN ISO 11612 (A1 B1 C1 F1), EN ISO 11611 class 1 A1 and EN 1149.
Is it suitable for electric arc?
No. This reference is not certified to IEC 61482.
Two-piece or coverall?
The 606003 jacket plus 603003 trousers set wins when you go in and out of the hot zone several times a day; the 602003 coverall is safer for overhead work, because it leaves no join at the waist.
What is it made of?
Twill of 97% cotton - 3% antistatic fibre, 270 g/m2.
How does it fasten?
With a concealed zip under a hook-and-loop flap, so the metal does not take the spatter.
How should it be washed?
According to the label, without fabric softener and without bleach; the washing cycle is part of the certification.
Is there a lighter version?
Yes, the 605003 flame-retardant shirt, 250 g/m2 and with the same certification.
