Cinca Wall Coping 49.2 cm - Anti-Pooling Chamfer and Base for Fencing
Cinca Wall Coping 49.2 cm: anti-pooling chamfer in vibro-pressed concrete
Standing water on a poorly capped wall causes stains, mould and gradual deterioration of the concrete. The 49.2 cm Cinca Wall Coping prevents this with a chamfered design that channels water off to the sides, while keeping a flat 16 cm central strip to support metal fencing, trellises or balusters.
✅ Key advantages
Anti-pooling chamfered design: drains rainwater away and prevents stains and mould.
16 cm flat strip: compatible with metal fencing, trellises and balusters.
Vibro-pressed concrete: greater density and strength than conventional vibrated concrete.
High-strength cement and additives: long-term durability outdoors.
4 colours: Grey, White, Beige and Black.
🏗️ Recommended applications
Capping for enclosure walls with trellis or metal fencing.
Base walls for balustrades.
Terrace parapets with an anchored railing.
Perimeter enclosures and boundaries between plots.
📋 Technical data sheet
Material: vibro-pressed concrete with selected natural aggregates, high-strength cement and next-generation additives.
Profile: chamfered with a flat central strip.
Size: 49.2 × 30 × 3.2 × 5 × 16 cm.
Flat strip: 16 cm.
Installation module: 50 cm with joint.
Colours: Grey, White, Beige and Black.
🧰 Installation
Level the top of the wall and mark the centre line with a string.
Dry-lay the course first: with a 50 cm module, the calculation is straightforward.
Spread flexible bonding mortar with a continuous bead along both edges.
Bed each piece with the flat strip centred and level it with a rubber mallet.
Leave a 3-5 mm joint and point it with elastic mortar.
Wait 48 hours before drilling for any anchor point.
📦 Available formats
Single unit.
Full pallet.
💡 Professional tip: vibro-pressed concrete is denser and absorbs less water, so it bonds less well than a porous piece if the mortar is dry. Lightly dampen the bearing face of the piece before bedding it (damp, not soaked) and use flexible bonding mortar: skip this step and, on façades exposed to the sun, a piece can easily come loose within a few months.
Frequently Asked Questions
¿Por qué mide 49,2 cm y no 50?
Porque con la junta de colocación el módulo cierra en 50 cm exactos.
¿Qué significa antiestancamiento?
Que el bisel evita que el agua se quede parada sobre el remate.
¿Para qué sirve la franja plana de 16 cm?
Para anclar cerramientos metálicos, celosías o balaustres.
¿Qué es el hormigón vibroprensado?
Un hormigón compactado por vibración y presión, más denso y más resistente.
¿Qué significan las cinco cifras de la medida?
Largo, ancho, espesor en el borde, espesor en el centro y anchura de la franja plana.
