Pressure regulator connector for PRO10SA compressor
A leak in the regulator makes the compressor lose pressure, start more often than it should and use more electricity. If the problem is in the connector, you don't have to replace the whole regulator: this pressure regulator connector for the PRO10SA compressor is the exact part to stop the leak in a few minutes.
It is a specific spare part from the PRO10SA parts breakdown, designed to replace a broken or leaking connector. An inexpensive repair that extends the life of your compressor.
Having the spare to hand avoids leaving the compressor out of action because of a small part: with the right spanner and a little thread sealant, the repair is done in minutes.
✅ Key benefits
Specific part: for the PRO10SA compressor.
Stops leaks: restores pressure and prevents constant restarts.
Inexpensive repair: without replacing the whole regulator.
Quick change: with basic tools.
Energy saving: a leak-free compressor starts less often.
🏗️ What it's for
Replacing a broken or leaking regulator connector.
Repairing the PRO10SA regulation system.
Preventive compressor maintenance.
Workshop spare to keep to hand.
📋 Technical specifications
Part: pressure regulator connector
Compatible compressor: PRO10SA
Installation: threaded, with sealant or PTFE tape
💡 Vetonek tip: to locate the leak, spray soapy water on the joints with the compressor under pressure: wherever bubbles appear, that's where the leak is. Replace the connector with the compressor disconnected and the tank empty.
Frequently asked questions
Is it suitable for other compressors?
It is intended for the PRO10SA. For other models, check the part in their parts breakdown.
How do I replace it?
Disconnect the compressor, drain the tank, unscrew the damaged connector and fit the new one with PTFE tape or thread sealant.
How do I know if the leak is in the connector?
With the compressor under pressure, spray soapy water: if bubbles appear at the connector, that's the part.
Why is it important to fix a leak?
Because the compressor loses pressure, starts more often, uses more energy and wears out sooner.
Do I need special tools?
No, all you need is a suitable spanner and PTFE tape or thread sealant.
Frequently Asked Questions
Is it suitable for other compressors?
It is intended for the PRO10SA. For other models, check the part in their parts breakdown.
How do I replace it?
Disconnect the compressor, drain the tank, unscrew the damaged connector and fit the new one with PTFE tape or thread sealant.
How do I know if the leak is in the connector?
With the compressor under pressure, spray soapy water: if bubbles appear at the connector, that's the part.
Why is it important to fix a leak?
Because the compressor loses pressure, starts more often, uses more energy and wears out sooner.
Do I need special tools?
No, all you need is a suitable spanner and PTFE tape or thread sealant.
Todo excelente. Tras una primera equivocación con el producto elegido, el equipo de atención al cliente se puedo a trabajar para solucionar el problema y darme una solución adecuada.
