55 A inverter plasma cutter for cuts up to 20 mm

302,82 €
302,82 € 309,00 €
You save 2% (6,18 €)

Delivery in 3–15 days

Tax included. Shipping calculated at checkout.
Packaging

55 A inverter plasma cutter for cuts up to 20 mm

Cuts steel, stainless steel, galvanised steel, brass, aluminium and copper quickly and cleanly using compressed air: no gases and no oxy-fuel cutting. This inverter plasma cutter runs on 230 V and cuts 12 mm recommended and up to 20 mm maximum.

Compact, with a robust casing and carrying handle, contact arc ignition and overcurrent protection. Includes PH60 torch, earth clamp and cable.

✅ Key benefits

  • Cuts almost any metal: steel, stainless steel, galvanised steel, brass, aluminium and copper.
  • 230 V: runs from a single-phase socket.
  • Up to 20 mm: 12 mm recommended cut.
  • Compressed air only: no gas cylinders.
  • Compact and robust: with a handle for moving it around the workshop.

🏗️ What it's for

  • Locksmithing and metal fabrication.
  • Sheet metal workshops, scrapyards and repairs.
  • On-site cutting and maintenance.
  • Trimming sheet metal and profiles for DIY.

📋 Technical specifications

  • Type: inverter plasma cutter
  • Power supply: 230 V, 50/60 Hz
  • Adjustment range: 10-55 A
  • Recommended / maximum cut: 12 mm / 20 mm
  • Duty cycle: 55 A at 60% (40 °C)
  • Open-circuit voltage: 254 V DC
  • Input current (Imax/Ieff): 38 / 24 A
  • Air flow: 195 L/min
  • Protection: IP21
  • Includes: PH60 torch, earth clamp and cable
  • Weight with packaging: 8 kg

💡 Pro tip: plasma needs clean, dry air: fit a filter with drain at the inlet and use a compressor that comfortably delivers 195 L/min. Water in the air is what wears out electrodes and nozzles fastest.

Complete your cutting station

To cut with quality you need clean, dry air: combine the plasma cutter with a compressor of sufficient flow, a filter with drain and a hose with a quick coupler. Add a spare consumables kit and do not forget welding gloves and eye protection.

Frequently asked questions

What do I need to use it?

A 230 V socket and an air compressor with sufficient flow (the machine consumes about 195 L/min).

What thickness does it cut?

12 mm recommended and up to 20 mm maximum.

Which metals does it cut?

Steel, stainless steel, galvanised steel, brass, aluminium and copper.

What is included?

PH60 torch, earth clamp and cable.

Are spare parts available?

Yes, we stock replacement electrodes for this machine.

Frequently Asked Questions

What do I need to use it?

A 230 V socket and an air compressor with sufficient flow (the machine consumes about 195 L/min).

What thickness does it cut?

12 mm recommended and up to 20 mm maximum.

Which metals does it cut?

Steel, stainless steel, galvanised steel, brass, aluminium and copper.

What is included?

PH60 torch, earth clamp and cable.

Are spare parts available?

Yes, we stock replacement electrodes for this machine.