Decorative pine crust
¿Cuanto material necesitas?
¿Cuanto material necesitas?
How much stone do I need?
How much stone do I need for the ground?
For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.
For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.
For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm
How much stone do I need to fill a gabion?
Density of ± 1,650kg by 1m³.
The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.
Clarifications
ATTENTION!
Granulometries are sizes of sizes
Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.
Broken stones
On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.
In the photos you can see, only real products are seen, broken pieces have been removed.
Dust and sand in products
This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.
Decorative pine crust
Discover Pino's decorative cortex: the perfect ally for your garden and your plants.
The Decorative pine crust It is a product 100% organic That not only beautifies your outer space, but also provides multiple benefits for the health of your plants. This bark, ideal to cover the ground, helps:
- Maintain soil moisture: A key factor that your plants appreciate, and that allows you Save irrigation water.
- Protect roots from cold winter: Keep heat in winter, helping the survival of your plants.
- Reduce weed growth: It facilitates the maintenance of your garden without complications.
- Be treadless without problem: Ideal for passage areas, it is not easily damaged.
- Detach a pleasant smell when wet: A sensory touch that will enchant your moments in the garden.
Pino decorative bark placement
His placement It is very simple, since it is applied directly to the earth, without any mystery.
Ideal substrate for orchids
Mixing the decorative bark with earth, you will get an excellent Substrate for your orchids. This product provides an appropriate aeration to the roots, a crucial appearance for its growth and development, better than with standard earth substrates.
Premium cortex
Our Premium cortex is crushed and classified with a size of 15-25 mm. Although in the market you can find cortex without classifying more economical, our cortex offers superior aesthetic care, since it presents a more uniform and attractive appearance than bark that vary widely between 5 mm and 100 mm.
We have this bark in bags of 60 l (approximate weight of 10 kg) and in Big Bale de 2.7 m³ (approximate weight of 650 kg).
Transform your garden with our decorative pine crust and offer your plants the best for healthy growth!