Industrial compressed air oil filter with cartridge
Oil-free air for unforgiving tools, paintwork and machinery. An industrial in-line filter that traps the oil carried over in compressed air in workshops and industry. It is fitted at the compressor or air receiver outlet so that much cleaner air reaches tools, spray guns and process equipment.
Three series and four flow rates to suit your installation: QF and DK with 0.01 micron filtration and VK with 0.003 micron filtration, for 570, 1,300, 2,000 and 3,500 L/min. All are supplied with the filter cartridge included.
Key benefits
Very fine filtration: 0.01 µm (QF and DK) or 0.003 µm (VK).
Four flow rates: from 570 to 3,500 L/min for every compressor size.
Cartridge included: ready to install.
Protects your investment: less oil in pipework, tools and finishes.
What it is for
Air installations in workshops and industry.
Spray booths and paint lines that need clean air.
Cascade installation with particulate pre-filters and dryer.
Technical features
Type: industrial oil filter for compressed air
Series: QF and DK (0.01 micron) · VK (0.003 micron)
Flow rates: 570 / 1,300 / 2,000 / 3,500 L/min
Cartridge: included
Vetonek tip: choose the filter for the actual flow rate of your compressor (or slightly above), never below: an undersized filter causes a pressure drop. For very clean air, install filters in cascade, from coarsest to finest, and fit an automatic drain on each bowl.
Frequently asked questions
Which flow rate should I choose?
One equal to or higher than the flow your compressor delivers in L/min, so as not to restrict the installation.
What is the difference between the series?
According to the manufacturer's price list, QF and DK filter down to 0.01 micron and the VK series down to 0.003 micron.
Does it include the filter element?
Yes, each filter is supplied with its cartridge included.
Where is it installed?
At the compressor or air receiver outlet, in the main air line, before the points of use.
Do I need a pre-filter?
To extend the life of the cartridge, it is advisable to fit a particulate filter upstream, from coarsest to finest.
Frequently Asked Questions
Which flow rate should I choose?
One equal to or higher than the flow your compressor delivers in L/min, so as not to restrict the installation.
What is the difference between the series?
According to the manufacturer's price list, QF and DK filter down to 0.01 micron and the VK series down to 0.003 micron.
Does it include the filter element?
Yes, each filter is supplied with its cartridge included.
Where is it installed?
At the compressor or air receiver outlet, in the main air line, before the points of use.
Do I need a pre-filter?
To extend the life of the cartridge, it is advisable to fit a particulate filter upstream, from coarsest to finest.
Todo excelente. Tras una primera equivocación con el producto elegido, el equipo de atención al cliente se puedo a trabajar para solucionar el problema y darme una solución adecuada.
