20 micron compressed air purifier filter

26,46 €
26,46 € 27,00 €
You save 2% (0,54 €)

Delivery in 3–15 days

Tax included. Shipping calculated at checkout.
Size

20 micron compressed air purifier filter

Say goodbye to water in your spray gun and tools. A purifier filter that traps condensed water and particles in compressed air before they reach your tools or spray gun. With a 20 micron filtration grade, it prevents droplets in the finish, rust in air motors and premature breakdowns.

Available with 1/4" or 3/8" and 1/2" female thread (the latter for 0-16 bar and up to 60 °C), for fitting at the air receiver outlet or at the working outlet.

Key benefits

  • Drier air: traps condensed water.
  • 20 micron filtration: stops particles and dirt.
  • Two sizes: 1/4" or 3/8" and 1/2" female.
  • Protected tools: less rust and internal wear.

What it is for

  • Compressor or air receiver outlet in workshops.
  • Paint line, before the regulator.
  • Workstations with pneumatic tools.

How to install it

Mount it vertically, with the bowl facing down, following the airflow direction arrow. Fit it after the air receiver, some distance from the compressor, so that the air arrives cooler and the water condenses inside the filter rather than in the tools. Check the bowl daily in humid periods and empty it when you see water building up. If you spray paint, fit it before the regulator on the paint outlet.

Technical features

  • Filtration: 20 microns
  • Threads: 1/4" female · 3/8" and 1/2" female
  • 3/8" and 1/2": 0-16 bar, max. 60 °C
  • References: CA-919/12 · CA-920

Vetonek tip: empty the bowl when you see water and mount it vertically, bowl facing down, as far from the compressor as possible so the air arrives already cooled and condenses inside the filter.

Frequently asked questions

Does it remove oil too?

It traps water and particles; for high-quality paintwork, combine it with a coalescing filter.

Where is it installed?

At the air receiver outlet or before the regulator on the working outlet.

What filtration grade does it have?

20 microns.

What pressure does it take?

The 3/8" and 1/2" version works from 0 to 16 bar and up to 60 °C.

How is it fitted?

Vertically, with the bowl facing down, following the airflow direction and draining the bowl when water builds up.

Frequently Asked Questions

Does it remove oil too?

It traps water and particles; for high-quality paintwork, combine it with a coalescing filter.

Where is it installed?

At the air receiver outlet or before the regulator on the working outlet.

What filtration grade does it have?

20 microns.

What pressure does it take?

The 3/8" and 1/2" version works from 0 to 16 bar and up to 60 °C.

How is it fitted?

Vertically, with the bowl facing down, following the airflow direction and draining the bowl when water builds up.