Clean steel welds and smooth, jerk-free feeding. Solid wire for MIG/MAG welding of thin to medium-thickness steel, with stable feeding and clean beads. Suitable for machines with two- or four-roller drives.
Choose 0.8 mm (0.8, 5 or 15 kg spools) or 1.0 mm on a 5 kg spool, depending on your machine and the thickness you weld. It requires a shielding gas suited to the type of steel: CO2 or an argon-CO2 mix.
✅ Key benefits
Stable feed: even wire feed with 2- or 4-roller drives.
Clean bead: less spatter and less cleaning afterwards.
Several formats: 0.8, 5 and 15 kg.
For thin and medium: the most common thickness range.
🏗️ What it's for
Metalwork, metal joinery and light structures.
Bodywork and vehicle repair.
Maintenance in workshops, on farms and in industry.
DIY with a gas MIG welder.
📋 Technical features
Type: solid steel wire for MIG/MAG
Diameters: 0.8 / 1.0 mm
Spools: 0.8 kg, 5 kg and 15 kg
Material: thin and medium-thickness steel
Gas: shielding gas suited to the steel (not suitable for gasless use)
Check your spool size
Small welders usually take up to 1 kg, many multi-process machines up to 5 kg and only workshop machines 15 kg. If you want to weld without a gas cylinder, the right wire is E71T-GS gasless flux-cored wire.
💡 Vetonek tip: always use a feed roller and contact tip of the same diameter as the wire, and keep the spool covered and dry between uses: rust and dust on the wire cause many jams and porous beads.
Frequently asked questions
What diameters and formats are available?
0.8 mm on 0.8, 5 and 15 kg spools, and 1.0 mm on a 5 kg spool.
Can it be used without gas?
No. It is solid wire and needs shielding gas. For gasless welding, use E71T-GS flux-cored wire.
What gas should I use?
A shielding gas suited to the steel, normally CO2 or an argon-CO2 mix.
What thicknesses does it weld?
Thin and medium-thickness steel.
Will it work with my welder?
It works on machines with two- or four-roller drives. Check the spool size your welder takes.
Frequently Asked Questions
What diameters and formats are available?
0.8 mm on 0.8, 5 and 15 kg spools, and 1.0 mm on a 5 kg spool.
Can it be used without gas?
No. It is solid wire and needs shielding gas. For gasless welding, use E71T-GS flux-cored wire.
What gas should I use?
A shielding gas suited to the steel, normally CO2 or an argon-CO2 mix.
What thicknesses does it weld?
Thin and medium-thickness steel.
Will it work with my welder?
It works on machines with two- or four-roller drives. Check the spool size your welder takes.
Todo excelente. Tras una primera equivocación con el producto elegido, el equipo de atención al cliente se puedo a trabajar para solucionar el problema y darme una solución adecuada.
