Skip to product information

      Steel MIG wire on a 15 kg spool

      63,70 €
      63,70 € 65,00 €
      You save 2% (1,30 €)

      Delivery in 3–15 days

      Tax included. Shipping calculated at checkout.
      Size

      Steel MIG wire on a 15 kg spool

      The most economical format for those who weld every day. Steel MIG/MAG welding wire on a 15 kg spool, in 1.0 and 1.2 mm diameters, designed for workshops, metalwork shops and structural fabricators with continuous consumption.

      A 15 kg spool reduces the cost per kilo and the number of spool changes over the week. It is the natural choice for workshop welders with a wire feeder for large spools and for series production of structures, trailers or metal joinery.

      ✅ Key benefits

      • 15 kg spool: lower cost per kilo and fewer stops to change spools.
      • Two diameters: 1.0 mm for medium thicknesses and 1.2 mm for thick sheet.
      • Continuous feed: designed for long welding shifts.
      • For steel: the most common material in metalwork and structures.

      🏗️ What it's for

      • Metalwork and metal joinery workshops.
      • Fabrication of structures, industrial buildings and trailers.
      • Boilermaking and series production.
      • Workshop MIG welders with room for a 15 kg spool.

      📋 Technical features

      • Material: steel
      • Process: MIG/MAG with shielding gas
      • Diameters: 1.0 mm · 1.2 mm
      • Spool: 15 kg

      1.0 or 1.2 mm

      Choose 1.0 mm for medium thicknesses and 1.2 mm for thick sheet and higher-amperage machines. First check that your welder takes 15 kg spools: many compact machines only accept 1 or 5 kg spools.

      💡 Vetonek tip: match the feed rollers and tip to the wire diameter and check the liner when you fit a new spool: a dirty liner slows the wire and causes an irregular arc.

      Frequently asked questions

      What diameters are available?

      1.0 mm and 1.2 mm, both on a 15 kg spool.

      Does my welder take 15 kg spools?

      Only workshop machines with room for a large spool. Check your welder's manual before buying.

      Does it need gas?

      Yes, it is solid steel wire for MIG/MAG welding with shielding gas, such as CO2 or an argon-CO2 mix.

      Which diameter should I choose?

      1.0 mm for medium thicknesses and 1.2 mm for thick sheet and higher-amperage machines.

      What roller and tip do I need?

      A feed roller and contact tip of the same diameter as the wire: 1.0 or 1.2 mm.

      Frequently Asked Questions

      What diameters are available?

      1.0 mm and 1.2 mm, both on a 15 kg spool.

      Does my welder take 15 kg spools?

      Only workshop machines with room for a large spool. Check your welder's manual before buying.

      Does it need gas?

      Yes, it is solid steel wire for MIG/MAG welding with shielding gas, such as CO2 or an argon-CO2 mix.

      Which diameter should I choose?

      1.0 mm for medium thicknesses and 1.2 mm for thick sheet and higher-amperage machines.

      What roller and tip do I need?

      A feed roller and contact tip of the same diameter as the wire: 1.0 or 1.2 mm.